Blue Spot Tools Ironmongery 102mm Black Powder Coated Tee Hinge 78026

Blue Spot Tools Ironmongery 102mm Black Powder Coated Tee Hinge

MPN: 78026

Barcode: 5028734780260

Size: 102mm

Weight: 0.15kg

Colour: Black

Overview:

This 102mm tee hinge from Blue Spot Tools is made from carbon steel with a black powder coated finish. It suits permanent outdoor installations on wooden gates, garden fences, and shed doors.

It mounts directly to the face of the gate and post with no recessing required. The T-shaped profile works with swing-open timber gates across a range of outdoor settings.

Key Features and Benefits

• Corrosion Protection: The powder coat finish guards the steel against rust in outdoor conditions.
• Carbon Steel Construction: The steel build handles the demands of regular outdoor use on gates and timber doors.
• Fixings Included: The pack contains all the fittings needed for installation - nothing extra to source.
• 5-Year Guarantee: Backed by Blue Spot Tools' manufacturer's guarantee for added peace of mind.

Specs & Attributes

• Material: Carbon steel
• Finish: Black powder coated
• Size: 102mm
• Weight: 0.15kg
• Use: External

Typical Applications

• Side access gate between properties
• Garden gate on a timber post
• Single or double shed door
• Summerhouse entrance door
• Outbuilding or workshop access door
• Replacement hinge on an existing outdoor gate

How to Use

• Mark Fixing Positions: Hold the hinge against the gate and post. Mark each fixing hole with a pencil.

• Pre-Drill Pilot Holes: Drill a pilot hole at each marked point to prevent the timber from splitting.

• Fit the Strap Leaf: Screw the long strap section to the face of the gate using the supplied fixings.

• Fit the Jamb Leaf: Screw the shorter T-section to the gate post, aligned with the strap.

• Test Operation: Open and close the gate to confirm it moves freely and sits level.

Frequently Asked Questions (FAQs)

• What size tee hinge do I need for a garden gate?
  A general rule of thumb is to use a hinge length of at least half the width of the gate. A 1000mm wide gate would need a minimum 500mm hinge. For gates taller than 2100mm, a third hinge fitted centrally helps manage the additional load.

• What is the difference between a tee hinge and a strap hinge?
  A tee hinge has a short rectangular leaf that fixes to the post and a longer strap that runs across the gate face, forming a T-shape. A strap hinge has two equal-length leaves. Strap hinges suit bi-fold or paired gate configurations where both leaves need extended support across a wider span.

• Can tee hinges be used on metal gates?
  Tee hinges are designed for timber. Fitting them to metal requires drilling through the frame and using bolts rather than wood fixings. For metal gate applications, weld-on or bolt-through hinges rated for that purpose are the more appropriate choice.

• How many hinges does a garden gate or shed door need?
  Two hinges are sufficient for most standard garden gates and shed doors. A third hinge fitted centrally is recommended for taller or heavier doors, or in locations with frequent high winds, to reduce flex and prevent the door from dropping over time.

Summary

The Blue Spot Tools 102mm black powder coated tee hinge is a no-fuss outdoor fitting for timber gates, shed doors, and garden fences. All fixings are included, and the hinge is backed by a 5-year guarantee.