Everbuild 902 Black Jack Bitumen and Flashing Primer 1 litre 90201

Everbuild 902 Bitumen Paint Primer and Flashing Primer 1 litre

Sika Code 486984

MPN 90201

Barcode 5029347009212

Everbuild 902 1 Litre Bitumen Primer a thin black primer used to give a key prior to applying bitumen paints and roof coatings and as a primer prior to applying any flashing tape system.

Benefits & uses

Fast drying, Suitable for use with all bituminous surface coatings mainly used for priming concrete roofs, floors, cementicious screeds, renders, Bitumen felt, asphalt, mastic

Weathered corrugated iron, steel and wood.

Limitations:

Do not use in areas where subsequent solvent contact is likely, avoid inhalation of vapours in confined spaces. allow sufficient drying time before over coating.

Surface Preparation:

Preparation of the surface all surfaces must be sound, stable and thoroughly clean and dry.

Metal surfaces should be wire brushed to remove rust, can be applied over red lead or zinc phosphate

Remove tar based paint systems before use.

New galvanised surfaces should be roughened with a wire brush or treated with a proprietary etch primer, fibre cement or rag felt apply generously to saturate the surface.

Approximate Coverage:

4 to 6 meters Square per litre depending on porosity of substrate, 11 meters square per litre on non porous surfaces

Everbuild Datasheets:

Everbuild 902 Bitumen Primer Technical Data Sheet

Everbuild 902 Bitumen Primer MSDS Safety Data Sheet

Everbuild 902 Bitumen and Flashing Tape  Primer Manufacturer Page

(Please note that tins will get dented in transit and this is not a reason for return please do not purchase tined products if this is an issue for yourself.)