Everbuild 902 Black Jack Bitumen Flashing Primer 5 litre 90205

Everbuild 902 Black Jack Bitumen Primer and Flashing Tape Primer 5 litre

Sika Code 486986

MPN 90205

Barcode 5029347009250

Everbuild 902 5 Litre Black-Jack Bitumen Primer used to give a key prior to applying bitumen paints and roof coatings.

Mainly used for priming Concrete roofs, floors, cementicious screeds, renders, Bitumen felt, asphalt, mastic Weathered corrugated iron, steel, Wood.

Fast drying suitable for use with all bituminous surface coatings

Also suitable as a primer prior to applying any Flashing Tape.

Product Limitations:

Do not use in areas where subsequent solvent contact is likely.

Avoid inhalation of vapours in confined spaces.

Allow sufficient drying time before overcoating.

Surface Preparation:

Preparation of the surface's all surfaces must be sound, stable and thoroughly clean and dry.

New galvanised surfaces should be scraped down with a hand scraper roughened with a wire brush or treated with a proprietary etch primer.

Fibre cement or rag felt apply generously to saturate the surface.

Metal surfaces should be wire brushed to remove rust.

can be applied over red lead or zinc phosphate.

Remove tar based paint systems before use.

Approximate Coverage

4 to 6 meters Square per litre depending on porosity of substrate

11 meters square per litre on non porous surfaces

Everbuild Official Data Sheets:

Everbuild 902 Bitumen Primer Technical Data Sheet

Everbuild 902 Bitumen Primer MSDS Safety Data Sheet

Everbuild 902 Manufacturer Page

(Please note that tins will get dented in transit and this is not a reason for return please do not purchase tined products if this is an issue for yourself.)