Toupret Plasterboard + Finish Filler Ready to Use 20kg FGLIP20GB

Toupret Plasterboard + Finish Filler Ready to Use 20kg

MPN: FGLIP20GB

Barcode: 3178310022511

Weight: 20kg

Colour: White (when dry)

Overview:

Toupret Plasterboard + Finish Filler is a ready-mixed, ready-to-use filler for plasterboard taping, jointing, and surface finishing. It applies smoothly and sands with ease, producing a clean, professional result on interior surfaces. No priming or sealing is needed before application, saving time on site. Once dry, it accepts any paint, primer, or wall covering.

The filler can be applied by hand or with an airless spray machine, making it suited to projects of varying scale. It bonds to a wide range of substrates, including gypsum, old painted surfaces, cement, concrete, cellular concrete, and all types of butted or tapered plasterboard. Application thickness reaches up to 5mm per coat, with a coverage rate of 1.7kg per m² at 1mm.

The product conforms to BS EN 13963:2014 for plasterboard jointing applications and NF/BS EN 16566:2014 for coating fillers. It carries a 12-month product guarantee from the date of purchase, when stored correctly in its original packaging away from sunlight and frost.

Key Features and Benefits

• Ready to Use: No mixing required - apply straight from the tub.
• No Spot Priming: No need to prime or seal the surface before applying.
• Easy to Sand: Sands smoothly once dry for a clean, flat finish.
• Manual or Spray Application: Apply by hand tools or airless spray machine.
• Wide Substrate Compatibility: Adheres to gypsum, cement, concrete, cellular concrete, old painted surfaces, and all plasterboard types.
• Application Thickness: Applies up to 5mm per coat.
• Coverage Rate: Approximately 1.7kg per m² at 1mm thickness.
• Fast Overcoat Time: Ready to paint in 12-24 hours after full drying.
• Strong Adhesion: Adhesion to substrate exceeds 0.5 MPa (EN 16566).
• Conforms to BS EN 13963:2014: Meets the standard for jointing materials for gypsum plasterboards.
• Conforms to NF/BS EN 16566:2014: Meets the standard for coating fillers for internal works.
• 12-Month Guarantee: Product guaranteed for 12 months from purchase in original, correctly stored packaging.

Typical Applications

• Plasterboard Jointing: Taping and filling joints on butted and tapered plasterboard edges.
• Surface Finishing: Applying a smooth finish coat over interior plasterboard walls and ceilings.
• Gypsum Surfaces: Finishing and filling on gypsum-based substrates.
• Old Painted Surfaces: Skimming and filling over previously painted interior walls.
• Cement and Concrete: Surface preparation and finishing on cement or concrete interiors.
• Cellular Concrete: Filling and levelling on cellular concrete block surfaces.
• Pre-Decoration Prep: Preparing interior walls prior to painting or wall covering application.

How to Use

• Prepare the Substrate: The surface must be hard, cohesive, clean, sound, and dry. Prepare substrates to current trade practice standards. Do not apply to damp, overheated, frozen, or polystyrene surfaces.

• Check Conditions: Do not apply below +8°C or above +35°C. Relative humidity must not exceed 70%. Avoid applying in direct sunlight.

• Apply the Filler: Use a filling knife, taping knife, trowel, or blade. Apply up to 5mm thickness per coat. For larger areas, use an airless spray machine.

• Second Coat: Apply the second coat once the first is hard and dry to the touch.

• Drying and Overcoating: Allow 12-24 hours for full drying before painting or applying a wall covering.

• Sanding and Clean-Up: Sand lightly once dry. Always wear a P2 dust mask when sanding. Dry product residue can be removed from tools without water.

Frequently Asked Questions (FAQs)

• Does Toupret Finish Filler need priming before application?
  No. There is no need to prime or seal the surface before applying this filler. It bonds directly to the substrate without a preparatory coat.

• What surfaces can Toupret Finish Filler be applied to?
  It can be applied to gypsum, old painted surfaces, cement, concrete, cellular concrete, and any type of butted or tapered plasterboard. It is for interior use only.

• How long before Toupret Finish Filler can be painted over?
  Allow 12-24 hours for the filler to dry fully before applying paint, primer, or wall coverings. Drying times vary based on coat thickness and ambient conditions.

• Can Toupret Finish Filler be applied with a spray machine?
  Yes. It can be applied manually using a filling knife, trowel, or blade, or with an airless spray machine for larger-scale applications.

• What is the coverage rate and maximum thickness for this filler?
  Coverage is approximately 1.7kg per m² at 1mm thickness. The maximum recommended application thickness per coat is 5mm.

Summary

Toupret Finish Filler Ready to Use 20kg is a professional ready-mixed finishing filler for interior plasterboard jointing, taping, and surface preparation. It sands easily, requires no priming beforehand, and accepts paint or wall coverings after a 12-24 hour drying time. Conforming to BS EN 13963:2014 and NF/BS EN 16566:2014, and backed by a 12-month guarantee, it is a proven choice for plasterers and decorators working on interior projects.

"Always read the Toupret Plasterboard + Finish Filler Ready to Use Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."