Toupret Airless All in One Spray Plaster 25kg Bag TTAIRR25GB

Toupret Airless All in One Spray Plaster 25kg Bag TTAIRR25GB

MPN: TTAIRR25GB

Barcode: 3178310021194

Weight: 25kg

Overview:

Toupret Airless All-in-One Spray Plaster is a ready-to-use interior spray plaster for levelling and fine finishing of walls and ceilings. Supplied in a 25kg bag, it goes straight into your airless machine - no mixing required.

The high-build formula builds up to 5mm in a single pass, producing an extra fine finish directly from the gun. Coverage runs at 1.7kg per square metre per millimetre of thickness, so material quantities are straightforward to calculate for any job.

Once dry, the plaster accepts all types of fillers, paints, and wall coverings without further treatment. It bonds to a wide range of substrates without priming, and tools clean down with water after use.

Key Features and Benefits

• Ready to use: No mixing or pre-preparation needed - apply straight from the bag.
• One coat system: Levels and fine finishes interior walls and ceilings in a single application.
• High build: Application thickness of up to 5mm per coat.
• Extra fine finish: Produces a smooth, refined surface after skimming.
• No priming required: Bonds directly to the substrate without a sealer or primer.
• Coverage rate: 1.7kg/m² per millimetre of thickness.
• Overcoatable in 24-48 hours: Paint, fill, or hang wall coverings once fully dry.
• Wide substrate compatibility: Works on gypsum, plasterboard, cement, concrete, cellular concrete, and old painted surfaces.
• Interior use: Formulated for interior walls and ceilings only.
• Water clean-up: All tools and equipment clean with water.
• 12-month guarantee: Guaranteed from date of purchase when stored correctly.
• Conforms to BS EN 16566: Fillers for internal and/or external works.

Typical Applications

• Levelling interior walls in preparation for decoration
• Fine finishing of plasterboard and drywall ceilings
• Skim coats over gypsum substrates
• Resurfacing old painted walls before redecoration
• Finishing cement and concrete interior surfaces
• Plastering over cellular concrete substrates
• Interior renovation projects requiring a high-build finish

How to Use

• Machine Preparation: Remove all gun filters (strainer, suction, and pencil) to allow product flow. Prime the airless machine with water before loading the plaster.

• Loading: Transfer the spray plaster from the bag into your bucket or hopper. The product is ready to use and does not need mixing.

• Nozzle Selection: Fit a suitable nozzle for the product - recommended sizes are 5.31, 5.35, 6.31, or 6.35. Refer to the technical datasheet or product packaging to verify.

• Application: Stand 0.7 to 1m from the surface at a constant 90° angle. Work in cross passes, overlapping each pass by 50%, covering one square metre at a time at a steady speed.

• Skimming: After spraying, skim immediately with a blade or trowel of at least 50cm. If spraying ceilings and walls, finish the ceilings first. Apply a second coat once the first is dry to the touch, if required.

• Sanding: Wait until the plaster is completely dry, then sand as needed before decoration.

Frequently Asked Questions (FAQs)

• What type of airless machine is needed to apply this plaster?
  You need an airless spray machine with a minimum flow rate of 5 litres per minute. Recommended nozzle sizes are 5.31, 5.35, 6.31, or 6.35 for best results.

• Does Toupret Airless All-in-One Spray Plaster require a primer before application?
  No primer or sealer is needed. The plaster bonds directly to the substrate, whether painted or unpainted, without any pre-treatment.

• How long does it take before the plaster can be painted over?
  Allow 24 to 48 hours for the product to dry fully before applying paint, filler, or wall coverings. Drying time varies with coat thickness, substrate type, and ambient conditions.

• Can Toupret Airless All-in-One Spray Plaster be used outside?
  No. This product is for interior use only. Do not apply to exterior surfaces, damp substrates, polystyrene, or wallpaper.

• What temperature range is required during application?
  Apply only when the temperature is between +8°C and +35°C. Relative humidity must remain below 70%. Avoid applying to overheated surfaces.

Summary

Toupret Airless All-in-One Spray Plaster (25kg) is a professional, ready-to-use interior spray plaster supplied in a 25kg bag. It levels and fine finishes walls and ceilings up to 5mm thick in one coat, across a wide range of substrates, with no mixing or priming required. The product is guaranteed for 12 months from purchase when kept in its original sealed packaging, away from sunlight and frost.

"Always read the Toupret Airless All-in-One Spray Plaster (25kg Bag) Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."