Toupret Decorators Quick Dry Filler TX 110 1kg TTREB901GB

Toupret Decorators Quick Dry Filler TX 110 1kg TTREB901GB

MPN: TTREB901GB

Barcode: 3178310018606

Size: 1kg

Colour: White (when dry)

Overview:

Toupret Quick Dry Filler TX 110 is a professional-grade powder filler for interior walls and ceilings. It dries ready to paint in just 3 hours, making it a good choice for fast-turnaround decorating work. The formula will not shrink or slump, regardless of application depth, so you get a consistent, stable repair every time.

This filler bonds strongly to a wide range of interior substrates, from gypsum plaster and plasterboard to cement, concrete, breeze blocks, and primed wood. Painted or unpainted surfaces are both suitable, whether new or previously renovated.

Once dry, the surface sands smoothly and accepts any conventional paint or wallpaper without flashing or grinning. There is no need to spot prime before overcoating, saving time on the job.

Key Features and Benefits

• Fast overcoat time: Ready to paint or wallpaper in 3 hours under normal conditions.
• No shrinkage or slump: Fills to any depth without cracking, sinking, or distorting.
• Strong adhesion: Achieves adhesion of over 0.5 MPa to a broad range of interior substrates.
• No spot priming needed: Will not flash or grin, so you can paint straight over the repair.
• Easy to sand: Dries to a smooth finish that sands back cleanly without tearing or dragging.
• Wide substrate compatibility: Adheres to plaster, plasterboard, cement, concrete, brick, stone, and primed wood.
• Works on painted surfaces: Bonds to both painted and unpainted substrates, new or old.
• Overcoat with anything: Compatible with any type of filler, paint, or wall coating.
• A+ indoor air quality rating: Meets the highest VOC emission classification for interior use.
• Workable for 30 to 40 minutes: Gives a practical window for application and shaping.
• Simple mix ratio: Add 450ml of water per 1kg of powder for a consistent, lump-free mix.
• Guaranteed for 12 months: Product is guaranteed from the date of purchase in its original, unopened packaging.

Typical Applications

• Wall repairs: Filling cracks, holes, and surface damage on interior walls.
• Ceiling repairs: Patching and smoothing damaged or uneven ceiling surfaces.
• Plasterboard filling: Filling joints, screw holes, and surface imperfections in drywall and lining boards.
• Pre-decoration preparation: Preparing interior surfaces before painting or wallpapering.
• Deep filling: Repairing deep holes or recesses without the risk of shrinkage or cracking.
• Multi-surface patching: Repairs to cement, concrete, breeze block, brick, stone, and primed wood.
• Fast-turnaround decorating: Jobs where the surface must be ready to paint the same day.

How to Use

• Mix: Add 450ml of water at room temperature per 1kg of powder. Always add the powder to the water. Stir until the mix is smooth and lump-free.

• Prepare the surface: Make sure the substrate is clean, dry, and free from dust, grease, and loose material. Do not apply below +8°C, above +35°C, or at relative humidity above 70%.

• Apply: Use a putty knife, taping knife, or trowel to apply the filler to the repair area. There is no depth limit, so deep holes can be filled in a single pass.

• Shape and smooth: Work the filler to the desired finish while it remains open. Working time is 30 to 40 minutes.

• Allow to dry: Leave to dry fully before sanding or overcoating. Under normal conditions, the surface is ready to paint or wallpaper in 3 hours. Thicker applications or higher humidity may extend drying time.

• Sand and overcoat: Once dry, sand back to a smooth finish and overcoat with any paint, filler, or wall coating. No spot priming is required. Clean tools with water immediately after use.

Frequently Asked Questions (FAQs)

• How long does Toupret Quick Dry Filler take to dry before painting?
  Under normal conditions, the filler is ready to paint in 3 hours. Thicker applications, cooler temperatures, or higher humidity may extend this time. Always check the filler is fully dry before overcoating.

• Can Quick Dry Filler be used for deep holes?
  Yes. There is no maximum application depth. The formula will not shrink or crack, so deep repairs can be completed in a single fill without the need for multiple coats.

• Do I need to prime the repaired area before painting?
  No. Once dry, the filler will not flash or grin, so there is no need to spot prime. You can paint straight over the repair with any conventional paint.

• What surfaces can Toupret Quick Dry Filler be applied to?
  It adheres to gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks, stone, and primed wood. Both painted and unpainted substrates are suitable.

• Can The Quick Dry Powder Filler TX 110 be used outside?
  No. This product is formulated for interior use only. Do not apply to exterior surfaces.

Summary

Toupret Quick Dry Filler TX 110 is a professional powder filler that combines speed and strength for interior wall and ceiling repairs. It fills to any depth without shrinkage, sands back smoothly, and is ready to paint in 3 hours - with no spot priming required before overcoating.

"Always read the Toupret Quick Dry Powder Filler TX 110 Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."