Toupret Ready To Use Filler Ready Mixed 1.5kg Tub TTRP01.5GB

Toupret Ready To Use Filler Ready Mixed 1.5kg Tub

MPN: TTRP01.5GB

Barcode: 3178310018873

Size: 1.5kg

Colour: White (when dry)

Overview:

Toupret Ready To Use Filler Ready Mixed 1.5kg Tub comes pre-mixed and is applied directly from the tub. No mixing is required - simply open and get to work. This interior wall and ceiling filler takes the fuss out of repair work. It sands down effortlessly and will not flash or grin once painted over.

The filler bonds to a wide assortment of interior substrates, both painted and unpainted. Suitable surfaces include gypsum plaster, plasterboard, cement, concrete, cellular concrete, breeze blocks, bricks, stone, and primed wood. It handles defects up to 1cm deep in a single pass.

Once fully dry, the surface accepts any type of paint or wall coating without spot priming. Drying time runs from 12-24 hours, depending on coat thickness and ambient conditions. The product holds an A+ Indoor Air Quality classification, making it safe for use in occupied spaces.

Key Features and Benefits

• Ready to use: Pre-mixed formula applies directly from the tub - no preparation or mixing needed.
• No spot priming: Paint straight over the dried filler without an additional priming step.
• No flashing or grinning: The surface stays uniform after painting, even with high-sheen finishes.
• Easy to sand: Dried filler sands down smoothly without excessive effort.
• Fills up to 1cm deep: Repairs deeper defects in a single application.
• 12-24 hour dry time: Ready to overcoat the same day or next day, depending on conditions.
• No working time limit: Use the product at your own pace - it will not skin over in the tub.
• Broad substrate compatibility: Works on plastered, concrete, brick, and board surfaces, painted or bare.
• Overcoat with anything: Compatible with any paint type or wall coating as a topcoat.
• A+ IAQ rated: Meets the highest Indoor Air Quality standard for low chemical emissions.
• Water clean-up: Tools wash clean with water - no solvents needed.
• 12-month guarantee: Product guaranteed for 12 months from purchase when stored correctly.

Typical Applications

• Filling holes and cracks in interior walls and ceilings
• Repairing surface damage on plasterboard and drywall lining
• Patching defects on gypsum plaster surfaces
• Filling imperfections on previously painted walls
• Repairing minor surface damage on cement, concrete, or cellular concrete
• Filling surface voids on breeze blocks, bricks, and stone
• Touching up primed wood surfaces before decoration

How to Use

• Preparation: Make sure the surface is clean, dry, and free from loose or flaking material.

• Application: Apply the filler directly from the tub using a blade, putty knife, or trowel.

• Depth: Build up to fill defects up to 1cm deep. Do not exceed the recommended depth in a single coat.

• Drying: Allow 12-24 hours before overcoating. Drying time varies with coat thickness, the substrate, and ambient conditions.

• Sanding: Once fully dry, sand the surface smooth to the required finish.

• Overcoating: Apply your chosen paint or wall coating directly. No spot priming is required.

Frequently Asked Questions (FAQs)

• Does ready to use filler need mixing before application?
  No. The filler is pre-mixed and applied straight from the tub without any preparation.

• How deep can I fill in one coat?
  You can fill defects up to 1cm deep in a single application.

• Can ready-to-use filler be used on exterior walls?
  No. This product is for interior use only and must not be applied to exterior surfaces.

• How long does ready-to-use filler take to dry before painting?
  Allow 12-24 hours before applying paint. Thicker coats, cooler temperatures, and higher humidity will all extend the drying time.

• What temperature conditions are needed for application?
  Apply between +8°C and +35°C with a relative humidity no higher than 70%. Avoid application in cold, damp, or freezing conditions.

Summary

Toupret Ready To Use Filler 1.5kg is a pre-mixed interior filler for walls and ceilings in a convenient 1.5kg tub. It fills defects up to 1cm deep, requires no spot priming, and accepts any paint or wall coating once dry. Backed by an A+ air quality rating and a 12-month product guarantee, it is a no-fuss option for interior repair and decoration work.

"Always read the Toupret Ready To Use Filler Ready Mixed Technical Datasheet before first use to make sure that you have the correct information and product for your application."