Toupret Extra Fine Surface Filler Ready Mixed 1.5kg Tub TTLIP01.5GB

Toupret Extra Fine Surface Filler Ready Mixed 1.5kg Tub TTLIP01.5GB

MPN: TTLIP01.5GB

Barcode: 3178310018880

Weight: 1.5kg

Colour: White

Overview:

Toupret Extra Fine Surface Filler provides a high-performance solution for achieving a white finish on interior walls and ceilings. This ready-mixed paste is formulated for smoothing over small defects on new or renovated substrates. It creates a surface that helps improve the look of paint finishes without the need for spot priming.

The formula meets the (EN 16-566) standard for adhesion with a rating of >0.5Mpa. It works effectively on gypsum plaster, plasterboard, old paintwork, cement, and concrete. This product is designed for manual application and delivers a smooth transition between the filler and the existing wall surface.

Features and Benefits

• Adhesion Strength: Tested to (EN 16-566) standards with a rating of >0.5Mpa for a secure bond.
• Air Quality: Rated with an IAQ classification of A+ for safer internal application.
• Ready Mixed: Formulated for immediate use straight from the tub to save time.
• No Spot Priming: Specifically designed to prevent flashing and grinning even under high-sheen paints.
• Fine Smoothing: Engineered to mask tiny scratches and surface imperfections before decorating.
• Vapour Permeable: Allows the substrate to breathe once the filler has fully cured.
• Application: The smooth consistency allows for spreading with a blade or trowel.
• White Finish: Dries to a clean white colour that helps with paint opacity.
• Compatibility: Can be overcoated with any Toupret filler or standard wall coating.
• Guarantee: Product guaranteed for 12 months from purchase (when stored in original packaging away from frost and sunlight).

Typical Applications

• Fine Smoothing: Masking light surface defects on renovated plaster walls.
• Pore Filling: Closing the grain on cement or concrete substrates before decorating.
• Plasterboard Finishing: Levelling out small indentations on jointed plasterboard.
• Pre-Paint Prep: Preparing old painted surfaces for a fresh decorative coat.
• Ceiling Renovation: Smoothing over minor blemishes on interior ceiling tiles.
• Thin Layer Levelling: General surface prep where a maximum thickness of 1mm is required.

How to Use

• Preparation: Remove all loose material and dust from the substrate for a clean work area.

• Application: Apply the paste manually using a filling blade or trowel at a thickness of up to 1mm.

• Environment: Do not apply at a temperature below +8°C or above +35°C or in humidity over 70%.

• Drying: Wait approximately 8 hours for the product to dry based on coat thickness and conditions.

• Overcoating: Apply paint or wall coating once the filler is completely dry to the touch.

• Clean Up: Wash all application tools with water immediately after finishing the task.

Frequently Asked Questions (FAQs)

• What is the coverage rate for the Toupret Extra Fine Surface Filler Ready Mixed Tub?
  The coverage for this product is approximately 450g/m² when applied at a thickness of 1mm.

• Does this filler require sanding before I start painting?
  This filler is created for an exceptionally smooth finish that typically avoids the need for sanding if applied correctly.

• Can I use this ready mixed filler on a bathroom wall that gets very damp?
  While vapour permeable, you must not apply it if the relative humidity is over 70% during the process.

• Will this extra fine surface filler prevent my paint from looking patchy?
  Yes, it is formulated to prevent flashing and grinning, meaning you do not need to spot prime before painting.

• How should the tub be stored to prevent the paste from drying out?
  Keep the tub sealed in its original package and store it away from direct sunlight and frost.

Summary

The Toupret Extra Fine Surface Filler Ready Mixed 1.5kg Tub is a professional solution for achieving a flawless interior finish. With its A+ IAQ rating and high adhesion strength, it provides a safe and effective way to prep walls for paint. This ready-to-use paste results in smooth surfaces without the need for extra priming or sanding.

"Always read the Toupret Extra Fine Ready Mixed Surface Filler Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."