Toupret Decorators Interior Filler 5kg 5 x 1kg TTREB7051GB

Toupret Decorators Interior Filler 5kg 5 x 1kg TTREB7051GB

MPN: TTREB7051GB

Barcode: 3178310018583

Size: 5kg (5 x 1kg bags)

Colour: White (when dry)

Overview:

Toupret Decorators Interior Filler is a professional-grade powder filler designed for repairing walls and ceilings in one coat, to any depth. Mix it with water, apply with a blade or trowel, and sand it back once dry. It sets in 30 to 40 minutes and is ready to paint in as little as 12 hours.

This filler will not shrink, slump, flash, or grin - making it a go-to choice for decorators who need a clean, consistent result. No spot priming is required before painting, saving time on site without compromising the finish.

Each pack contains five individual 1kg bags, keeping the powder fresh and making it straightforward to mix only what you need. It carries an A+ Indoor Air Quality (IAQ) classification, making it suitable for occupied or sensitive environments.

Key Features and Benefits

• One coat fill: Repairs walls and ceilings in a single application, to any depth.
• No depth limitation: Suitable for shallow surface marks through to deeper holes and voids.
• Sets in 30 to 40 minutes: Faster working times help keep projects on schedule.
• Ready to paint in 12 to 24 hours: Overcoat with any paint or wall coating once fully dry.
• No spot priming required: Won't flash or grin, even under high-sheen paints.
• Will not shrink or slump: Stays put after application for a flat, even surface.
• Contains: Five individual 1kg bags help keep the product fresh and reduce waste.
• 12-month guarantee: Covered when the product is stored correctly in the original, unopened packaging.

Typical Applications

• Wall repairs: Filling holes, cracks, and indentations on plastered or painted interior walls.
• Ceiling repairs: Patching damaged areas on gypsum plaster and plasterboard ceilings.
• Pre-decoration prep: Bringing surfaces to a smooth, even finish before painting or wallpapering.
• Concrete and masonry filling: Suitable for use on cement, breeze blocks, bricks, and stone.
• Plasterboard patching: Repairing cut-outs, fixings, and surface damage on drywall lining.
• Old painted surfaces: Spot-filling areas where paint or coatings have chipped or cracked.
• Renovation work: General interior filling tasks across residential and commercial sites.

How to Use

• Prepare the surface: Make sure the area is clean, dry, and free from loose material, dust, or grease before applying.

• Mix the filler: Add 500ml of clean water at room temperature for every 1kg of powder. Pour the powder into the water and stir until the mix is smooth and lump-free.

• Apply to the repair: Use a coating blade, wall scraper, or trowel to press the filler firmly into the repair area. There is no depth limit, so build up as required in a single pass.

• Allow to set and dry: Leave the filler to set for 30 to 40 minutes. Allow 12 to 24 hours for full drying before sanding or overcoating, depending on coat thickness and conditions.

• Sand and finish: Once fully dry, sand the repair smooth. Clean tools with water immediately after use.

• Overcoat: Apply any paint, filler, or wall coating directly over the dried repair. No spot priming is needed.

Frequently Asked Questions (FAQs)

• Do I need to spot prime before painting over this filler?
  No. This filler is formulated to resist flashing and grinning, so no spot priming is needed - even under high-sheen paints. Just make sure the filler is completely dry before applying any finish coat.

• How deep can I apply this filler in one coat?
  There is no recommended depth limit for this product. You can apply it to shallow surface repairs or deeper holes in a single coat without needing to build up in layers.

• What surfaces can this interior filler be used on?
  It bonds to gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks, and stone. It is for interior use only and must not be used on exterior surfaces.

• How long does Toupret Interior Filler take to dry before painting?
  Toupret Interior Filler is ready to paint after 12 to 24 hours. Drying time varies depending on the thickness of the coat, substrate type, temperature, and humidity.

• What temperature is needed to apply this filler?
  Apply at temperatures between +8°C and +35°C, and in conditions where relative humidity does not exceed 70%. Avoid application in very cold, damp, or excessively warm conditions.

Summary

Toupret Decorators Interior Filler is a professional powder filler for repairing walls and ceilings across a wide range of interior substrates. With no depth limit, no spot priming required, and a clean finish that won't shrink or slump, it covers the demands of day-to-day decorating work in a single coat.

"Always read the Toupret Decorators Interior Powder Filler Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."