Toupret Quick Fill Lightweight & Ready Mixed 4 Litre Tub TTREDLP04GB

Toupret Quick Fill Lightweight & Ready Mixed 4 Litre Tub

MPN: TTREDLP04GB

Barcode: 3178310018941

Size: 4L

Colour: White (when dry)

Overview:

Toupret Quick Fill is a lightweight, ready-mixed interior filler for one-coat repairs on walls and ceilings. It sets fast - ready to paint in just 30 minutes - and will not shrink or slump after application. No spot priming is needed before painting, and it will not flash or grin through your topcoat, saving time on prep work.

The filler adheres to a wide range of interior substrates, both unpainted and painted. Suitable surfaces include gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks, stones, and primed wood. There is no fill depth limit, so both shallow marks and deeper repairs can be tackled in a single coat.

Quick Fill carries an A+ indoor air quality rating and contains 0% VOC. Apply with a blade, putty knife, or trowel between 8°C and 35°C at a relative humidity no higher than 70%.

Key Features and Benefits

• Fast overcoating: Ready to paint in as little as 30 minutes at 1mm thickness.
• One coat repairs: Fills in a single application with no need for multiple layers.
• No shrinkage or slump: The filler stays put once applied, with no sinking or pulling away.
• No spot priming required: Paint straight over the repair without a primer coat.
• No flashing or grinning: The filled area will not show through your topcoat finish.
• Ready to use: Comes pre-mixed straight from the tub - no water or mixing needed.
• Lightweight formula: Made with lightweight material extracts and acrylic polymer for easy application.
• No fill depth limit: Suitable for both surface scratches and deeper voids in one pass.
• Wide substrate compatibility: Works on plasterboard, cement, concrete, brick, stone, and more.
• A+ IAQ rating: Classified as very low emission for indoor air quality.
• 0% VOC: Contains no volatile organic compounds.
• Easy to sand: Sands back smoothly once dry for a clean, flat finish.
• 12-month guarantee: Backed by a twelve-month guarantee when kept in its original sealed packaging and stored away from direct sunlight and frost.

Typical Applications

• Filling cracks and holes in plasterboard or gypsum plaster walls.
• Repairing surface defects and gaps on interior ceilings.
• Patching damage on old painted surfaces before repainting.
• One-coat repairs on cement, concrete, or cellular concrete walls.
• Filling minor damage to breeze block, brick, or stone surfaces.
• Preparing interior walls and ceilings before hanging wallpaper.
• Spot repairs on primed timber surfaces inside the home.

How to Use

• Prepare the substrate: Make sure the surface is hard, clean, dry, and free from dust or loose material.

• Open and apply: Scoop the filler directly from the tub using a blade, putty knife, or trowel - no mixing needed.

• Fill the repair: Work the filler firmly into the defect. There is no depth limit, so that the repair can be completed in one pass.

• Allow to dry: Leave for a minimum of 30 minutes at 1mm thickness. Thicker fills or less favourable conditions may extend drying to around 2 hours.

• Sand if required: Once fully dry, sand lightly to achieve a smooth, flat surface ready for decorating.

• Overcoat: Apply any conventional paint, wallpaper, or additional Toupret filler. No spot priming is needed before painting.

Frequently Asked Questions (FAQs)

• How long does Toupret Quick Fill take to dry before painting?
  At 1mm application thickness, the filler is ready to paint in 30 minutes. Thicker coats or less favourable ambient conditions may extend drying to around 2 hours.

• Can Toupret Quick Fill be used on exterior walls?
  No. This product is formulated for interior use only. Do not apply it to exterior surfaces.

• Does this filler need spot priming before painting over it?
  No spot priming is needed. Quick Fill will not flash or grin through a topcoat, so that you can paint directly over the dried repair.

• What is the maximum fill depth for each application?
  There is no recommended maximum application thickness. Deeper repairs can be filled in a single coat without restriction.

• What temperature is needed to apply Quick Fill?
  Apply between 8°C and 35°C at a relative humidity no higher than 70%. Avoid applying in cold, damp, or very hot conditions.

Summary

Toupret Quick Fill Lightweight is a fast, no-fuss interior filler for one-coat repairs on walls and ceilings. It requires no mixing, no spot priming, and is ready to paint in as little as 30 minutes - keeping it a practical option for professional decorators working to a schedule. Available in a 4L tub, it covers a broad range of interior substrates with no fill depth limit.

"Always read the Toupret Quick Fill Lightweight & Ready Mixed Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."