Toupret Decorators Interior Filler 2kg TTREB702GB

Toupret Decorators Interior Filler 2kg TTREB702GB

MPN: TTREB702GB

Barcode: 3178310018576

Size: 2kg

Colour: White (when dry)

Overview:

Toupret Interior Filler is a professional powder filler for repairing walls and ceilings to any depth in a single coat. It sets within 30-40 minutes and will not shrink or slump, giving a clean, consistent result every time.

There is no need to spot prime before painting over this filler. Once fully dry, it will not flash or grin - even under high-sheen paints. Surfaces are ready to overcoat within 12-24 hours of application.

The filler works on a wide range of interior substrates, including gypsum plaster, plasterboard, old painted surfaces, cement, concrete, breeze blocks, bricks, and stone. It carries an A+ indoor air quality rating and is made in France.

Key Features and Benefits

• One-coat application: Fills to any depth in a single pass - no build-up coats required.
• No shrinkage or slumping: The filler holds its shape as it dries, reducing the need for rework.
• No spot priming needed: Apply paint directly over the dried filler without risk of flashing or grinning.
• Fast setting time: Sets in 30-40 minutes, helping to keep projects on schedule.
• Ready to paint in 12-24 hours: Overcoat with any paint or wall coating once fully dry.
• Easy to sand: Sands back smoothly without excessive effort or dust.
• Wide substrate compatibility: Suitable for plaster, plasterboard, concrete, brick, stone, and more.
• No fill depth limit: Apply to shallow surface marks or deep repairs without restriction.
• A+ indoor air quality rating: Meets the highest IAQ classification for interior use.
• Simple mixing: Mix with water at a 50% ratio - straightforward preparation with no specialist equipment.
• Compatible overcoat: Accepts any type of filler, paint, or wall coating once dry.
• Made in France since 1938: Manufactured to long-standing professional standards.

Typical Applications

• Filling and repairing cracks in plasterboard and drywall
• Patching holes and surface damage in gypsum plaster walls
• Repairing defects in old painted surfaces before decoration
• Filling surface irregularities in cement and concrete walls
• Patching breeze block, brick, and stone interior surfaces
• Repairing ceiling cracks and holes before painting
• General pre-decoration surface preparation on interior walls

How to Use

• Prepare the surface: Make sure the substrate is clean, dry, and free from dust, grease, and loose material. Do not apply to exterior surfaces.

• Mix the filler: Add 500ml of clean water per 1kg of powder (50% ratio). Add powder to water at room temperature and stir until smooth and lump-free.

• Apply the filler: Use a coating blade, wall scraper, or trowel to apply the filler to the repair area. There is no fill depth limit.

• Allow to set and dry: The filler sets in 30-40 minutes. Leave to fully dry for 12-24 hours before painting, depending on coat thickness and ambient conditions.

• Sand back: Once dry, sand the surface smooth as required to prepare for decoration.

• Overcoat: Apply paint or wall coating of your choice directly over the filler - no spot priming is needed.

Frequently Asked Questions (FAQs)

• Do I need to spot prime before painting over Toupret Interior Filler?
  No. The filler will not flash or grin once dry, so spot priming is not required. Make sure the filler is completely dry before applying paint, regardless.

• How long does Toupret Interior Filler take to dry?
  The filler sets in 30-40 minutes. It is ready to paint 12-24 hours after application. Drying time varies depending on coat thickness, substrate type, and ambient temperature and humidity.

• Can Toupret Interior Filler be applied to any depth in one coat?
  Yes. There is no fill depth limit, so it can be used for both shallow surface marks and deeper repairs without applying multiple layers.

• What surfaces can Toupret Interior Filler be applied to?
  It is suitable for gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks, and stone. It is for interior use only and must not be applied to exterior surfaces.

• At what temperature should Toupret Interior Filler be applied?
  Apply at temperatures between +8°C and +35°C. Do not apply at a relative humidity above 70%. Working outside these conditions may affect adhesion and drying performance.

Summary

Toupret Decorators Interior Filler is a powder-based repair filler for interior walls and ceilings. It fills to any depth in one coat, sets in 30-40 minutes, and requires no spot priming before painting. With an A+ indoor air quality rating and compatibility with a broad range of substrates, it is a practical choice for decorators working on plaster, plasterboard, concrete, brick, and more.

"Always read the Toupret Interior Powder Filler Technical Datasheet before first use to make sure that you have the correct information and product for your application."