Toupret Decorators Quick Dry Filler TX 110 2kg TTREB902GB

Toupret Decorators Quick Dry Filler TX 110 2kg

MPN: TTREB902GB

Barcode: 3178310018613

Size: 2kg

Colour: White (when dry)

Overview:

Toupret Quick Dry Filler TX 110 is a professional-grade powder filler for interior walls and ceilings. It dries fast, allowing overcoating with paint or wallpaper in just 3 hours. It bonds strongly to a wide range of surfaces without spot priming, saving time on busy job sites.

This filler will not shrink or slump, even when applied at depth. It sands back smoothly and leaves a clean, flat finish that won't flash or grin under paint.

Mixed with water on site, the filler has a working time of 30 to 40 minutes. It carries an A+ Indoor Air Quality (IAQ) classification, making it well-suited to occupied or sensitive environments.

Key Features and Benefits

• Fast overcoat time: Ready to paint or paper in as little as 3 hours after application.
• No shrinkage or slumping: Stays in place once applied, regardless of fill depth.
• No depth limitation: Apply in a single pass without needing to build up multiple layers.
• No spot priming required: Won't flash or grin under paint, even at high sheen levels.
• Strong adhesion: Achieves adhesion greater than 0.5 MPa (EN 16-566) on a wide range of substrates.
• Easy to sand: Cuts back cleanly for a smooth, flat finish with minimal effort.
• A+ IAQ classification: Low emissions make it suitable for use in occupied spaces.
• Compatible overcoating: Accepts any type of filler, paint, or wall coating.
• Simple mixing: Just add 450ml of water per 1kg of powder and stir until smooth.
• Easy tool clean-up: Tools wash off with water immediately after use.
• 12-month product guarantee: Covered from date of purchase when stored correctly (in its original, unopened packaging).

Typical Applications

• Wall repairs: Filling holes, dents, and surface damage on interior walls.
• Ceiling repairs: Patching cracks and imperfections on interior ceilings.
• Pre-decoration filling: Preparing surfaces before painting or wallpapering.
• Deep filling: Single-coat application where significant depth is needed.
• Multi-substrate repairs: Use on plasterboard, cement, concrete, brick, stone, and primed wood.
• Renovation projects: Suitable for both new builds and refurbishment work on previously painted or unpainted surfaces.

How to Use

• Prepare the surface: Make sure the surface is clean, sound, and free from dust, grease, and loose material. Do not apply to exterior surfaces.

• Mix the filler: Add 450ml of water per 1kg of powder (45% mixing rate). Pour the powder into water at room temperature and stir until smooth.

• Apply the filler: Use a putty knife, taping knife, or trowel to apply the filler. There is no fill depth limitation.

• Allow to dry: Leave to dry fully before sanding. The filler is ready to paint within 3 hours, depending on coat thickness, substrate type, and ambient conditions.

• Sand and finish: Once dry, sand back to a smooth, flat finish. No spot priming is needed before painting or papering.

• Clean tools: Wash all tools with water immediately after use.

Frequently Asked Questions (FAQs)

• How long does Toupret Quick Dry Powder Filler take to dry?
  The filler is generally ready to overcoat within 3 hours. Drying time varies depending on the coat thickness, substrate type, and the temperature and humidity in the room.

• Can the Quick Dry Filler be used on exterior surfaces?
  No. This product is formulated for interior use only. Do not apply it to exterior surfaces.

• What surfaces can TX 110 Quick Dry Filler be applied to?
  It bonds well to gypsum plaster, plasterboard, drywall, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks, stone, and primed wood.

• Do I need to spot prime before painting over the Toupret Filler?
  No spot priming is needed. The product won't flash or grin under paint, even when using paints with a high sheen level. Just make sure the filler is fully dry before you paint.

• What is the application temperature range for TX 110 Quick Dry Powder Filler?
  Apply at temperatures between +8°C and +35°C. Relative humidity must not exceed 70% during application.

Summary

Toupret Quick Dry Filler TX 110 is a fast-drying powder filler for professional interior wall and ceiling repairs. It bonds to a broad range of substrates, sands back easily, and accepts paint or wallpaper in just 3 hours with no spot priming needed. Available in a 2kg pack, it is a practical, time-saving choice for decorators and tradespeople.

"Always read the Toupret Quick Dry Powder Filler TX 110 Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."