Toupret Decorators Quick Dry Filler TX 110 10kg 10 x 1kg TTREB9101GB

Toupret Decorators Quick Dry Filler TX 110 10kg (10 x 1kg) - TTREB9101GB

MPN: TTREB9101GB

Barcode: 3178310018637

Size: 10kg (10 x 1kg bags)

Colour: White (when dry)

Overview:

Toupret's Quick Dry Filler TX 110 is a professional-grade interior powder filler that can be painted over in as little as 3 hours. Supplied as a convenient 10kg box containing 10 individual 1kg bags, it suits decorators who need a fast turnaround on wall and ceiling repairs.

Mix the powder with water and apply at any depth without worrying about shrinkage or slumping. The formula bonds strongly to a wide range of interior substrates and sands back smoothly without loading the paper.

Once dry, the filler will not flash or grin under paint, so there is no need to spot prime the repaired area. Any conventional paint or wallpaper can go straight over the top, saving time on the job.

Key Features and Benefits

• Fast overcoat time: Ready to paint or paper in 3 hours under normal conditions.
• No shrinkage: Fills to any depth without shrinking or slumping after application.
• No spot priming needed: Will not flash or grin, so painting can begin immediately after drying.
• Strong adhesion: Bonds firmly to most interior surfaces, including painted and unpainted substrates.
• Easy to sand: Dries to a smooth finish that cuts back without effort or excessive dust.
• 30 to 40 minute working time: Gives enough open time to work on larger repairs without rushing.
• Wide substrate compatibility: Suitable for plaster, plasterboard, concrete, brick, breeze block, and primed wood.
• A+ indoor air quality rating: Meets the highest classification for indoor air quality.
• No depth limitation: Can be applied in a single pass regardless of repair depth.
• Convenient pack format: 10 x 1kg individual bags reduce waste and make portion control straightforward on site.
• Compatible with all topcoats: Accepts any type of paint, filler, or wall coating over the top.
• Water-based formula: Tools clean up with water after use.

Typical Applications

• Wall repairs: Filling holes, cracks, and damage on interior plastered walls.
• Ceiling repairs: Patching impact damage or cracks on interior ceilings before decoration.
• Plasterboard repairs: Spot filling joints, screw holes, and surface damage on drywall lining.
• Renovation work: Preparing old painted surfaces, concrete, or brick for redecoration.
• Deep filling: Single-pass repair of deeper holes or voids without the need for backing material.
• Pre-wallpaper preparation: Smoothing walls and ceilings before hanging wallpaper.
• Rapid-turnaround projects: Any interior decoration job where speed between filling and painting is a priority.

How to Use

• Prepare the surface: Make sure the area is clean, sound, and free from dust, grease, or loose material before starting.

• Mix the filler: Add 450ml of water per 1kg of powder (a ratio of 45%). Pour the powder into the water at room temperature and stir until the mixture is smooth and lump-free.

• Apply the filler: Use a putty knife, taping knife, or trowel to press the filler firmly into the repair. There is no fill depth limit, so a single application is sufficient.

• Allow to dry: Leave the filler to dry fully. Under normal conditions, the surface will be ready to paint or paper within 3 hours. Allow longer in cold or humid conditions.

• Sand and finish: Once dry, sand back lightly to a smooth finish. No spot priming is needed before applying paint or wallpaper.

• Clean tools: Rinse all tools with water immediately after use before the filler sets.

Frequently Asked Questions (FAQs)

• How long does Toupret Quick Dry Powder Filler take to dry?
  Under normal conditions, the filler is ready to paint or paper within 3 hours of application. Drying time can extend in cold temperatures, high humidity, or where thicker applications have been used.

• Can this TX 110 filler be used outside?
  No. Toupret Quick Dry Filler TX 110 is formulated for interior use only. Do not apply it to exterior surfaces.

• What is the maximum thickness you can apply in one coat?
  There is no depth limitation. The TX 110 powder filler can be applied in a single pass to any depth without shrinking or slumping.

• Do I need to prime the filled area before painting?
  No spot priming is required. Once the filler is completely dry, paint or wallpaper can be applied directly over the top without any risk of flashing or grinning.

• What surfaces can Toupret Quick Dry Filler be applied to?
  It bonds to a wide range of interior substrates, including gypsum plaster, plasterboard, old painted surfaces, cement, concrete, cellular concrete, breeze blocks, bricks, stone, and primed wood.

Summary

The Toupret Quick Dry Filler TX 110 10kg is a fast-setting interior powder filler that delivers professional results on walls and ceilings. With a 3-hour overcoat time, unlimited fill depth, and no need for spot priming, it is well-suited to decorators who need to work quickly without cutting corners on quality.

"Always read the Toupret Quick Dry Powder Filler TX 110 Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."