Bond It All Purpose Wood Colour Filler 250ml White Teak Pine Dark Light Oak

Bond It Premium Joiners All Purpose Wood Colour Filler 250ml

Available in 5 Colours

White - BDWF1WH

Light Oak - BDWF1LO

Pine - BDWF1PN

Teak - BDWF1TK

Dark Oak - BDWF1DO

BOND IT ALL-PURPOSE PREMIUM JOINERS GRADE READY TO USE WOOD FILLER

supplied in a tough plastic container suitable for internal and external use.

Easy to use ready mixed premium joiners grade filler ideal for filling small imperfections max 5mm depth in wood.

Filler leaves a sandable surface, that can be stained, painted, varnished or dyed, even with microporous stains, waterproof when dry.

An easy to use, ready mixed, high quality, solvent‐free filler thats ideal for filling small imperfections and covering the recesses left by nails and screws in wood.

Bond It 1 Part Wood Filler Benefits and Areas of Use

• Non hazardous water based filler
• Suitable for internal and external applications.
• Solvent free.
• Non flammable
• Low odour
• Ready to use
• Filling small holes, splits and surface imperfections
• Covering the recesses left by nails and screws

Uses

General wood filling of window sills, frames, banisters, MDF and laminates, etc.

Repairing wood damaged by wet rot in both internal and external locations.

Repair damage and chips to parquet or laminate flooring, wooden furniture, upto a maximum of 5mm depth.

Preparation

Ensure the repair area is clean and dry and free from dust or any contamination that may affect adhesion.

Cover any nail and screw heads with an oil based paint and allow to dry.

Wet down the surfaces that the material is to be applied to.

Note: If you intend to overstain the repair, choose the filler colour closest to the wood you are filling, not the stain you intend to use.

Always check the stain on a small area as the filler may absorb the stain at a different rate to the wood.

Application

Stir well before use and apply with a wetted filling knife or spreader, forcing into cracks and holes.

For deep holes, build up in layers allowing each layer to dry.

Leave slightly proud and when completely dry, sand down.

Drying time touch dry in 30 minutes.

When over painting, staining or varnishing, you may get a colour difference with the surrounding wood, so always check on a small area first.

Do not add stain to Bond It ALL PURPOSE WOOD FILLER.

Not suitable for filling gaps with high movement such as joints between floor boards.

For outdoor applications the cured filler must be sealed with an oil based paint leave filler to dry for 12 hours before applying paint.

As the filler may absorb some stains at different rates to the surrounding timber, always test a small area first.

Filler may dry darker.

Do not exceed 5mm in one coat.

For Deep or areas subject to impact use Bond It 2 part wood filler