Bond It Waterproof Premium D4 Wood Glue Adhesive 1 Litre BDA018

Bond It Waterproof Premium D4 Wood Glue Adhesive 1 Litre

MPN BDA018

Barcode 5056437400864

Bond It Premium 1 Litre Solvent Free External High Grade Industrial D4 Wood Glue Adhesive Based on the latest hybrid PVA resin technology.

Bond It D4 Wood Adhesive provides the user with a waterproof D4 grade wood adhesive with none of the safety issues associated with conventional isocyanate containing polyurethane D4 grades.

Has excellent water resistance, suitable for water immersion this premium adhesive can be used internally and externally and gives a high strength, water resistant, impact and temperature resistant bond that is usually stronger than the wood itself.

Bond It D4 Wood Glue is ideal for all general woodworking and joinery uses, assembly line work, RF HF cure systems, wood on wood laminating, furniture assembly and house hold DIY use.

Dries clear with easy water clean up.

Excellent rate of bond strength development.

D4 water resistance, suitable for short term water immersion.

Low timber staining characteristics.

Suitable for radio frequency cure.

This is a universal system and is applicable for furniture production, parquet flooring, window frames, window scantling, door manufacturing and solid wood bonding

Preparation

Surfaces to be bonded must be clean, dry and free from dust, grease or contaminants that may hinder adhesion.

Mis-machined parts may require longer setting times and could produce a weaker bond.

Note: drying time is extended at low temperatures and high humidity.

Application

Apply this adhesive thinly and evenly to one side or, if a high degree of water resistance is required, to both sides, using a spreading machine, glue roller, serrated trowel, glue brush and another suitable device.

Do not over apply as this will slow down the cure, Clamp surfaces together until adhesive dries.

1 hour drying time full strength after 8 hours.

Support until fully cured 8 hours at 20 degree C.

Ensure product is fully dried before water exposure

When fitting dowels, the adhesive should be applied to the holes.

Best results will be achieved when room, material and adhesive temperature is between 18  and 20 degree .