Cromar Cromapol Fibre Reinforced Repair and Roof Coating White 5kg APOLW-5F

Cromar Cromapol Fibre Reinforced Roof Repair Roof Coating White 5kg

MPN APOLW-5F

Barcode 5036684008624

Cromapol is a fibre reinforced liquid acrylic resin dispersed in solvent designed to prevent the ingress of water and is effective on all common roofing surfaces and types.

Due to the high level of fibres in Cromapol the coating will bridge small gaps and require only a one coat application to give instant waterproofing.

White Cromapol has great solar reflective capability's.

Cromar Cromapol One Coat 5Kg White this is an extremely strong and tough thick product.

Waterproofing Protection of flat and pitched roofs, roof lights, flashings, fibre cement sheeting, gutters, slate, asphalt, lead, metal.

General sealing, maintenance, repair and waterproofing of most common roofs in wet or dry conditions for use on concrete, fibre cement, roofing felt, mastic, asphalt, existing bituminous roof coatings, rigid uPVC corrugated iron, metals, slates, brickwork, tiles, lead, Glass fibre, copper and zinc. Waterproofing guttering plastic and metal, down pipes, gully's, flashings, upstands, vents and leadwork.

Available in 4 Colours

Mid Grey Cromapol Fibre reinforced Roof Coating

Black Cromapol Fibre reinforced Roof Coating

White Cromapol Fibre reinforced Roof Coating

Translucent Cromapol Roof Coating

Main Points

• 5kg tub 5kg is similar volume to 5 litre
• White in Colour
• Gives an instant roof repair even to damp surfaces.
• May also be applied in frosty conditions down to 5 degree C.
• Cromapol is easily applied using a brush, roller or squeegee.
• Brush applied and dries to a smooth seamless flexible membrane which resists algae and fungal growth.
• Because of the high level of fibre it will bridge small cracks
  
• Requires only a one-coat to give instant and total water protection even in areas subject to ponding.
• Cromapol will tolerate damp surfaces although as with any application for best results are obtained on a dry surface.
• White and grey have great solar reflective capability's 

Application

1. Clean all debris to ensure a dust free surface, all moss and lichen must be removed using a Fungicidal Wash, ensuring all corners and gutters are clean and free from plant growth.
2. Ensure the area to be repaired is free from standing water, make good all cracks, splits, small holes and flashings prior to application.
3. Gap or expansion joints greater than 3mm must be covered using Glass‐Fibre scrim and Cromapol this must be carried out prior to full coating.
4. Cromapol will tolerate damp surfaces although as with any application for best results Cromar recommend applying to a dry surface.
5. Cromapol is easily applied using a brush, roller or squeegee.
6. Application temperature should be between 5 degree C  and 25 degree C.
   

• 1-2kg per meter square
• 5kg = 5 to 2.5 meters square

Drying time up to 1 week depending on temperature moisture and thickness of coating.

The product maybe soft for a further period but this is not detrimental to the waterproofing qualities of the product.

Take a look at the Full Range of Roofing and Guttering Products.

Please note that tins will get dented in transit and this is not a reason for return please do not purchase tined products if this is an issue for yourself.