Blue Spot Tools Electralight COB Work Light (Without Batteries) 65277 Bluespot

Electralight COB Work Light (Without Batteries) - 65277

MPN: 65277

Barcode: 5028734652772

Size: 4.5cm x 4cm x 21cm

Weight: 0.15kg

Overview:

The Electralight COB Work Light is a portable, battery-powered light suited to garages, warehouses, and workshops. It houses a 150-lumen COB panel and a 7-LED torch in one compact body. Both units operate independently or together.

Two built-in mounting options allow hands-free positioning without any fixings. Press the rear magnet to a steel surface or loop the hanging hook over a fixed point while you focus on the task.

Key Features and Benefits

• Dual-mode operation: Run the COB panel, the 7-LED torch, or both at once to match the lighting needed.
• Magnetic mount: The high-strength rear magnet holds the light against any steel surface without fixings or brackets.
• Hanging hook: The rear hook lets you suspend the unit overhead or from a fixed anchor point.
• Battery powered: No mains supply needed - use it in vehicles, lofts, confined spaces, or on outdoor jobs.
• Compact build: A lightweight body that is easy to carry and reposition around a workspace.
• Guarantee: Blue Spot Tools manufacturer's lifetime guarantee

Specs & Attributes

• COB Work Light Output: 150 lumens
• Torch Output: 20 lumens
• Torch LEDs: 7
• Battery: 3 x AA (not included)
• Dimensions: 4.5cm x 4cm x 21cm
• Weight: 0.15kg

Typical Applications

• Under-bonnet inspection and vehicle maintenance
• Workshop and garage task lighting
• Warehouse inspection or picking work
• Loft, crawlspace, or roof void access
• Plumbing and electrical work in confined areas
• Lighting in locations where mains power is unavailable

How to Use

• Fit the batteries: Insert 3 x AA batteries into the battery compartment before first use.

• Select your light: Switch on the COB panel, the 7-LED torch, or both together depending on the brightness required.

• Mount to a surface: Press the rear magnet to any steel surface to hold the unit in position.

• Hang overhead: Loop the rear hook over a beam, rail, or hook to direct light downwards over a work area.

• Switch off when done: Turn off both functions after use to preserve battery life.

Frequently Asked Questions (FAQs)

• What does COB mean on a work light?
  COB stands for Chip on Board. Multiple LED chips are mounted directly onto a single substrate, forming one compact module. This produces a wider, more uniform beam than a single LED diode.

• How many lumens do I need for working in a garage or workshop?
  For close-up tasks such as reading small parts or under-bonnet work, 100 to 200 lumens is typically adequate. General area lighting for a full garage usually requires 1000 lumens or more, depending on the size of the space.

• Can the magnet in a work light damage tools or electronic equipment?
  Strong magnets can interfere with magnetic storage media and sensitive electronic components placed in direct contact. Keep the magnet away from older hard drives, credit cards, and precision instruments.

• What is the difference between a COB work light and a standard LED torch?
  A COB work light emits a wide flood-style beam designed to illuminate a broader work area. A standard LED torch uses a focused beam to project light over a longer distance at a narrower angle.

• Are battery-powered work lights any good for professional use?
  Yes. They work anywhere without a power outlet, including vehicle interiors, outdoor sites, and confined spaces. They remove the need for trailing cables, which can present a trip hazard in busy working environments.

Summary

The Electralight COB Work Light (65277) combines a 150-lumen COB panel with a 20-lumen, 7-LED torch in one compact, lightweight unit. A high-strength rear magnet and hanging hook allow hands-free positioning on metal surfaces or overhead fixtures. Blue Spot Tools covers the product with a manufacturer's lifetime guarantee.