Bond It Path Patio Seal Solvent Free Slab & Block Paving Sealer 5 litre BDH061

Bond It Drive Alive Block Paving & Patio Seal – Solvent Free, Clear Low Sheen Sealer – 5 Litre

MPN: BDH061

Barcode: 5060021363954

Size: 5 Litre Tub

Overview

The Bond It Drive Alive Block Paving Path Patio Seal 5 litre is a highly effective, solvent-free acrylic sealer designed to protect and enhance the appearance of patios, paths, driveways, and block paving. Ideal for both residential and commercial use, this clear, low-sheen sealer provides long-lasting protection against a variety of environmental factors such as sunlight, water, oil, petrol, and fungal or moss growth. With a focus on durability and safety, Bond It Patio Seal is perfect for extending the lifespan of your outdoor surfaces.

Why Choose Bond It Patio Seal?

When it comes to sealing and protecting block paving, concrete paths, patios, and natural stone, Bond It Patio Seal stands out for its exceptional performance. The product acts as a protective barrier, guarding against water penetration and the harmful effects of oil, petrol, and other contaminants. It also prevents the build-up of dirt and grime, making maintenance much easier and enhancing the overall appearance of your outdoor surfaces.

One of the key benefits of Bond It Patio Seal is its ability to maintain the vibrant colour of your block paving and patio slabs, preventing them from looking dull or weathered over time. This sealant also significantly extends the lifespan of your outdoor surfaces by providing a strong, protective coating that withstands the rigours of everyday exposure.

Key Benefits of Bond It Patio Seal:

• Solvent-Free Formula: Bond It Patio Seal is a non-flammable, low-odour solution that is much safer to use compared to traditional solvent-based products.
• Improves Aesthetic Appeal: The sealer enhances the colour and overall look of your patios, block paving, and natural stone, making surfaces look refreshed and rejuvenated.
• Dust-Proof and Easy to Clean: It acts as a dust proofer and makes it easier to clean the treated surfaces, reducing dirt and grime build-up.
• Water & UV Resistance: The sealer dramatically improves water and UV resistance, protecting surfaces from fading or degradation due to the elements.
• Mould and Fungal Growth Prevention: Bond It Patio Seal retards the growth of mould, moss, and other fungal organisms, helping to keep surfaces cleaner and safer.
• Slip-Resistant Finish: The hard-wearing, low-sheen film provides a slip-resistant finish, ensuring safer walking surfaces even when wet.

Preparation:

• Remove organic growth lichens etc. that may be present.
• For best results pre treat the areas with Bond It PATIO BLASTER refer to data sheet.
• Wash all debris away and ensure the surface is dry and free from oil, grease, dust and loose material that may hinder adhesion.

Application Guidelines:

Bond It Patio Seal is a ready-to-use product, and no dilution is necessary. For optimal results, follow these simple steps:

1. Surface Preparation:

   • Prior to application, remove any organic growth like lichen, moss, or algae.
   • For best results, use Bond It PATIO BLASTER (refer to the data sheet for instructions) to treat the area before sealing.
   • Thoroughly clean the surface, removing all debris, oil, grease, dust, and any loose materials that could affect adhesion. Ensure the surface is dry.

2. Application Process:

   • Shake the container well to mix the contents.
   • Apply a single, even coat using a brush, roller, or squeegee. Avoid pooling or ponding of the product.
   • Allow the sealer to dry for 3-4 hours, depending on weather conditions. Don’t traffic the area until the sealer is fully dry.

3. Temperature and Humidity:

   • For the best results, apply Bond It Patio Seal in temperatures between 5°C and 30°C.
   • Colder, humid conditions will slow drying time, so ensure the area is dry before application.

Important Notes

• Pre-Seal Surface: Ensure paviours are sealed before applying any pointing or jointing compound, as some compounds may stain porous paving materials.
• Avoid Over-Application: Over-application or applying the sealer on damp surfaces can lead to white discoloration. Always ensure the surface is dry.
• Weather Conditions: Do not apply Bond It Patio Seal if rain is expected. Protect treated areas from rain until fully dry.
• Non-Porous Surfaces: Do not use on non-porous surfaces.
• Safety Precautions: Keep children and pets away from treated areas until the sealer is completely dry.

Application Kits Available

Bond It Patio Seal can be applied easily with the following application kits:

• 9 inch Single Arm Application Kit
• 12 inch Double Arm Application Kit

Areas for Use:
Bond It Patio Seal is ideal for sealing and protecting outdoor surfaces such as block paving, concrete paths, patios, and natural stone from damage caused by sunlight, water, oil, petrol, and fungal growth.

Also Available in Trade size Bond It Patio Seal 25 litre