Bond it Indian Sand Stone Natural Sealer 5 litre BDISS5

Bond it Drive Alive Indian Sand Stone Natural Stone Sealer

Size 5 litre

MPN BDISS5

Barcode 5056437400413

Bond It Invisible Indian Sandstone Sealer acts as an invisible seal to paths, patios and driveways and provides long term resistance against staining and algae growth.

Bond it natural finish Indian sand stone is a solvent free advanced Fluoro polymer based formulation used to seal and protect patios particularly for high quality natural stone.

Gives a high level of protection against water and oil penetration.

The application can be done in one single coat and is suitable to use with most forms of natural stone.

Product Breakdown

• Specifically designed for porous surfaces such as natural stone and Indian sandstone.
• Suitable for high levels of UV radiation.
• Stain resistant.
• Improves water and oil resistance.
• Helps prevent fungal and moss growth.
• Fast curing.
• One coat.
• Walk on after 3 to 4 hours depending on atmospheric conditions.
• Low odour.
• Ideal for use with Indian sandstone, sandstone, York stone, Limestone and other forms of natural stone.
• Provides an easy clean surface.
  

Approximate Coverage

• 4 to 8 meters square per litre.

Main Points

Protects patios, natural stone from water ingress from oil stains, particularly effective for protecting patios from fat spills and splashes from barbecues.

Indian stone sealer does not affect the colour or appearance of your patio and gives durable highly effective protection.

Preparation

Remove organic growth lichens and other dirt and debris etc.

For best results use Bond It Patio Blaster refer to the technical data sheet.

Wash all debris away and ensure the surface is dry and free from oil, grease, dust and loose material that may hinder adhesion.

Applying Indian Sandston Sealer

Ready to use, and does not require diluting.

We advise that you test this product on a small inconspicuous area prior to use to check compatibility.

Shake can thoroughly ensuring the product is well mixed.

Ensure that the surface is completely dry prior to use.

Apply a single coat using either a brush, roller or squeegee.

ensuring no pooling or ponding occurs.

Allow 3 to 4 hours drying time before trafficking the area colder humid conditions will slow drying times

Application temperature between 5 degree C and 30 degree C.

Application Kits Available 9 inch Single Arm Application Kit or 12 inch Double Arm Application Kit