Bond It Mould Stop Moss Mildew Remover 5 Litre Fungicidal Wash BDH070

Bond It Mould Stop Fungicidal Wash Moss Mould and Mildew Remover 5 Litre

Barcode: 5060021362346

MPN: BDH070

Size: 5 Litre Tub

Product Overview:

• Bond It 5 litre ready to use spray a powerful fast acting fungicidal solution which is effective on most surfaces.
• Quickly removes fungus and lichen from floors walls and roofs, removes all types of organic growth, algae, etc. from brick concrete, wood, tarmacadam, painted surfaces, decking, garden furniture, paviours, plastic and glass and can also be used on fabric awnings.
• Bond It Mould Stop can be applied internally and externally, it also leaves a residual surface to help prevent further infestation.
• Kills mould caused by damp on internal and external floors and walls.
• Kills mould growth on roofs prior to coating with bituminous coatings.
• Ideal for use at home, in the garden, for caravans and boats, public walk areas, in farm yards, kennels and stables.
• Removes algae from patios drives and similar surfaces.

Bond It 5 litre tub of Mould Stop fungicidal wash is a ready to use sprayable and brushable powerful fast acting fungicidal solution which is effective on most masonry surfaces but not limited to just that surface will work on wood, plastic, paving walls plaster render just about any surface, it quickly removes fungus mould and moss, lichen from floors walls and roofs, removes all types of organic growth, algae, etc. from brick concrete, wood, tarmacadam, painted surfaces, decking, garden furniture, paviours, plastic and glass and can also be used on fabric awnings.

Bond It Mould Stop can be applied internally and externally, it also leaves a residual surface to help prevent further infestation, kills mould caused by damp on internal and external floors and walls, kills mould growth on roofs prior to coating with bituminous coatings, ideal for use at home, in the garden, for caravans and boats, public walk areas, in farm yards, kennels and stables, removes algae from patios drives and similar surfaces.

How to Use Bond it Mould stop:

1. If using outside make sure rain is not due as this will dilute the product.
2. Ensure areas are well ventilated.
3. Before applying remove dirt grease and loose debris.
4. Use straight do not dilute can be applied by spray avoid applying by spray on a windy day.
5. you can also us a paintbrush, soft broom, watering can.
6. Apply an even coat of the area of application ensuring the whole surface is wet.
7. Ensure you allow the formula to seep into cracks and crevices do not wash off.
8. Leave for 2 to 3 days it will kill all organic growth it touches just like a weedkiller.
9. If stubborn growth is still present treat again as required

Bond It Mould stop 5 Litre Approximate Coverage:

• Apply by brush or spray at a rate of 1 litre per 5 to 15 meters Square depending on surface porosity so 5 litres will cover approximately 25 to 75 meters.
• This product can help prevent organic growth for months to come.

Bond it Mould Stop Notes:

• Do not dilute ready to use formula.
• For use only as specified as a surface biocide.
• Always read label before use and wear suitable protective equipment.
• Remove all surface debris and growth from the area to be treated.
• No scrubbing or pressure washing required Do not wash off.
• Do not allow this product to contaminate plants and ponds or soil that will be planted
• HSE Approved.
  

FAQs:

What Colours is it: Bond It Mould Stop is a Clear Liquid.

Is this product Flammable: No this product is not flammable.

What's the Composition: Mould Stop is water based.

How long does it take to work: Leave for 2 to 3 days but it will carry on working.