Bond It 10L Plasterers Pregrit Internal Plaster Bonding Agent Coating BDPG10

Bond It Plasterers Pregrit Internal Plaster Bonding Agent Paint Coating

Pack Size 10 Litre

MPN BDPG10

Barcode 5060021368621

A one part Pre Grit paint on ready-to-use internal plaster bonding agent with added aggregate to provide a key prior to plastering.

Bonding Agent for smooth surfaces

Contains sand/aggregate to provide plaster key

Ready to use, one coat application

Perfect for use on smooth substrates

Pigmented yellow to identify treated areas

Phthalate free formulation.

Pre Grit Uses

PLASTERERS PREGRIT should be used as a primer and bonding aid prior to plastering on surfaces such as concrete, plaster and difficult, low or non-porous substrates.

For internal use only, this product is not suitable for external applications.

For pre coating of textured and artex ceilings prior to plastering

Application

Thoroughly stir before use. Ensure all surfaces are clean, dry and free from any contaminants that may hinder adhesion, including any loose or flaking material. Ensure the background is sound and will support the weight of the plaster.

Do not dilute.

Simply apply one coat of the grit paint using a brush or roller and leave to dry for a minimum of 24 hours before plastering.

Note

cold or humid conditions will increase drying times. Do not use in temperatures below 5 degree c

Limitations

- Do not use in areas where permanent dampness is likely.

- Do not use on new cement when cement has not fully cured. Do not use when the temperature is below 5 degree C.

- Do not use for external applications.

Coverage

Depending upon surface porosity approximately 4-5m2 / litre.

For External Render Projects use Bond-it External Render Pregrit.