Bond It Contractors PVA 25 Litre BDAC25 Drum

Best Price Trade Option 25 Litre Drum

Bond It Contractors PVA 25 Litre

MPN BDAC25

Barcode 5060021364906

Bond It Trade Best Price 25 Litre drum the most cost effective way of purchasing BOND IT CONTRACTORS PVA designed specifically for use in the

building industry as a general purpose bonding agent, and additive for concrete and plasters and as a multi-use primer adhesive.

An all purpose, contractors grade primer, sealer and bonding agent a multi-purpose primer, sealer, cement filler and plaster admixture that adheres to most common building and DIY materials.

Bobd it contractors PVA can be used with plaster, cement, timber, gypsum wall boards and paper the properties as an adhesive include fast drying. It is also a readily dilutable primer for sealing

applications or addition to cement and plaster to improve adhesion and cure.

A cost effective all round Vinyl Acetate Homopolymer that Improves adhesion to most common building surfaces, that Improves flexibility of mortars and screeds Ideal for priming and dust sealing on flaking surfaces.

Main Points

• Plaster primer, porous surface primer and sealer.
• Rendering key coat.
• General Admixture.
• Dust sealer.
• General purpose adhesive for bonding all common construction materials.
• Phthalate Free formulation.
  

Preparation

All surfaces must be clean, dry and free from dust, grease or contaminants that may hinder adhesion.

Remove all loose material and ensure underlying material is strong enough to take the weight or load to be applied.

Application

Suitable as a primer for renderings, for bonding new plaster to old plaster, on porous brick, stone, floor tiles and new plasterboard.

Dilute 1 part Contractors PVA with 2 parts water and mix well.

Apply using a brush, working material well into crevices and gaps.

Allow coat to dry before continuing.

As a Key Bonding Coat

For use as a key coat for new plaster, concrete repairs, cement screeds and renders.

Prime as above then brush apply second coat of Contractors PVA undiluted and apply topping whilst Contractors PVA A is still tacky.

As a key coat for ceramic tiles and painted surfaces, first ensure that the surfaces will withstand loading on new plaster.

Apply Bond It Contractors PVA undiluted and trowel on plaster whilst still tacky.

Key Coat for porous and rough surfaces, bonding paving, terrazzo, quarry, slate and floor tiles.

Prime the floor and back of the tiles as specified under priming.

Mix 4 parts Contractors PVA with 1 part water and coat floor and tile backs.

While still tacky apply sand and cement slurry to the floor and bed in the tiles.

The bedding should be of a minimum 3mm follow manufacturers recommendations.

As an adhesive

Apply to one side and bring together within 3 to 5minutes, apply constant moderate pressure by clamps or weights.

As an admixture Contractors Grade PVA will improve workability and adhesion of plasters and cements.

Cement Admixture

Prime as above then mix 1 part Contractors grade PVA to 1 part of gauging water and add to cement in place of the gauging water.

Plaster admixture

Prime as above then mix 1 part Contractors Grade PVA to 2.5 parts gauging water and add to plaster in place of the gauging water.

Always read the technical data sheet prior to use.