Bond It Solar 2.5 Litre Reflective Aluminium Roof Paint BDB030

Bond It Solar Reflective Aluminium Roof Paint 2.5 Liter

Size 2.5 Litre

MPN BDB030

Barcode 5060021367914

Bond it Bitubond 2.5 Litre tin of thin bituminous based aluminium heat reflective protective paint, designed to reflect the harmful sunrays and heat away from the roof surface to extend the life of bitumen based roof coatings and roof felt.

Protect the roof from heat with this easily brushable paint which dries to a silvery Reflective finish.

Protects your roof from Heat Damage the number one cause of damage and premature ageing of the roof surface.

A bitumen coating with aluminium pigment that's light reflective, the coating dries to a silvery finish the product reflects the sun's rays and keeps the roof and any other surface much cooler so extending the life.

Specifically designed for application over primed metal walls and roofs to reduce heat absorption.

Bond it Solar Paint Benefits and Uses

• 2.5 Liter tin for smaller roofing jobs.
• Fast drying 1 hour at normal temperatures.
• Substantially Prolongs life of roof repairs and bituminous coatings,
• Protects roof from UV light.
• As a light heat reflective coating over Primed metals and Bituminous coatings and felts.
• Can also be used on aged steel roofs not fresh galvanised sheets.
• provide protection against solar degradation and heat gain.
• suitable for use over bituminous coatings, aged asphalt and primed steel.

Surface Preparation

1. All surfaces must be structurally sound, clean, dry and free from surface contaminants such as grease, rust and dirt.
2. If necessary, remove any organic growth i.e. lichen, moss with a fungicidal wash such as Bond It Patio Blaster.
3. If the surface is still dusty after cleaning, or covered with weathered bitumen, prime with Bitumen Primer and allow to dry.

Application

1. Stir prior to use and periodically during application.
2. Apply two coats by brush or mohair roller, the second coat being applied as soon as the first coat is dry.
3. A better reflective finish is produced if the product is finished with a brush even if applied with a roller.

Over recently applied bituminous surfaces allow the following minimum periods to elapse after the final coat has dried before applying ALUMINIUM SOLAR REFLECTIVE PAINT

hot applied coatings ‐ 24 hours.

solvent based coatings ‐ 10 days.

water based coatings ‐ 14 days.

Bond It solar paint approximate coverage Per Litre

4 to 6 meters square on porous substrates

up-to 11 meters square on non porous

Not suitable for direct application to expanded polystyrene.

Take a look at the Full Range of Roofing and Guttering Products.

(Please note that tins may get dented in transit and this is not a reason for return please do not purchase tined products if this is an issue for yourself.)