Blue Spot Tools 460mm (18") Extra Long 3/8" Soft Grip Ratchet (72 Teeth) 02035

Blue Spot Tools 460mm (18") Extra Long 3/8" Ratchet (72 Teeth)

MPN: 02035

Barcode: 5028734020359

Size: 460mm (18"), 3/8" Drive

Overview:

The Blue Spot Tools' 460mm (18") ratchet takes a 3/8" drive and pairs a chrome molybdenum head with a heat-treated carbon steel body. At 0.62kg, it delivers solid reach without becoming unwieldy during extended periods of use.

At 460mm, the shaft generates more turning force per stroke than a standard-length 3/8" ratchet, helping you shift stubborn fixings in harder-to-reach areas. Seventy-two teeth step through just 5° per click, letting you make progress where the handle swing is limited.

Socket swaps are fast with the built-in quick-release button, and the soft grip handle keeps the tool comfortable and secure during longer working sessions.

Key Features and Benefits

• Chrome Molybdenum (Cr-Mo) Head: Handles the torque loads associated with 3/8" drive work without deforming at the drive point during sustained use.
• 460mm Shaft Length: Reaches deeper into recessed areas than a standard ratchet, and generates more turning force per stroke without stepping up to a larger drive.
• 72-Tooth Mechanism: Just 5° of handle movement per click - enough to keep progressing even when swing clearance is minimal.
• Quick Release Button: Remove and swap sockets one-handed without pulling the ratchet away from the fastener.
• Soft Grip Handle: Reduces slipping when hands are dirty, and cushions the grip through repeated strokes.
• Heat-Treated Carbon Steel Body: Heat treatment hardens the shaft, helping it resist bending under the leverage generated at 460mm.

Specs & Attributes

• Drive Size: 3/8"
• Length: 460mm (18")
• Weight: 0.62kg
• Head Material: Chrome Molybdenum (Cr-Mo)
• Body Material: Heat-Treated Carbon Steel
• Teeth: 72
• Ratcheting Increment: 5°
• Guarantee: Blue Spot Tools Lifetime Guarantee

Typical Applications

• Under-bonnet bolt removal on cars and vans
• Suspension component access and servicing
• Exhaust system fastener removal
• Gearbox and transmission work
• Workshop bench assembly tasks
• General mechanical maintenance

How to Use

• Select a Socket: Choose a 3/8" drive socket that matches the fastener size.

• Attach the Socket: Push the socket firmly onto the square drive until it clicks into position.

• Set the Direction: Turn the direction lever clockwise for tightening or anticlockwise for loosening.

• Drive the Fastener: Seat the socket squarely onto the fastener and apply steady, controlled pressure.

• Change Sockets: Press the quick-release button to drop the socket when switching to a different size.

Frequently Asked Questions (FAQs)

• What is a 3/8" drive ratchet used for?
  3/8" drive covers the widest range of general automotive work - engine bay bolts, underbody fixings, brake components, and mid-range fastener sizes. It handles enough torque for most maintenance tasks while still fitting into spaces where a 1/2" drive head would be too large.

• What is the difference between a 3/8" and 1/2" drive ratchet?
  Drive size determines how much torque the tool can handle before the mechanism risks failure. 3/8" drive suits general maintenance and most engine work. 1/2" drive is reserved for heavier tasks - wheel nuts, suspension fasteners, and large-diameter bolts where higher torque is needed.

• When should you use an extra-long ratchet instead of a standard one?
  Extra long ratchets help in two situations: when a fastener sits deep inside a recess a standard handle cannot reach, and when you need more leverage on a tight or partially seized bolt without stepping up to a larger drive size.

• What socket sizes fit a 3/8" drive ratchet?
  3/8" drive ratchets typically accept sockets from around 8mm up to 24mm. Smaller fasteners are better served by a 1/4" drive. For anything above roughly 24mm where higher torque is involved, a 1/2" drive gives the tool the strength needed to handle the load safely.

• What is the difference between a ratchet and a breaker bar?
  Breaker bars have no ratcheting mechanism, which makes them considerably stronger under high torque. Use a breaker bar to initially free a very tight or seized fastener, then switch to a ratchet to wind it out quickly. Using a ratchet alone on a seriously stuck fastener risks damaging its internal mechanism.

Summary

Blue Spot Tools' 460mm (18") Extra Long 3/8" Soft Grip Ratchet (02035) pairs a chrome molybdenum head with a heat-treated carbon steel shaft, covering general automotive and workshop fastening work with extra reach. The 72-tooth mechanism steps through 5° per click, and the quick-release button keeps socket changes straightforward. Every tool comes backed by the Blue Spot Tools Lifetime Guarantee.