Blue Spot Tools 17 PCE Metric 1/2" Low Profile Impact Sockets (8-24mm) 01602

Blue Spot Tools 17 PCE Metric 1/2" Low Profile Impact Sockets (8-24mm)

MPN: 01602

Barcode: 5028734016024

Weight: 1.3kg

Colour: Black

Overview:

The Blue Spot 17-piece 1/2" metric low profile impact socket set covers sizes 8mm to 24mm in a single set. Each socket uses chrome molybdenum steel, which handles the repeated shock loads produced by air and electric impact tools. A black phosphate finish protects bare metal from corrosion during storage and regular use.

The low profile body is shorter than a standard impact socket. This reduced height lets you reach fasteners in confined spaces - such as inside wheel arches or around engine components - where a taller socket would foul on surrounding parts. All 17 sockets carry a 1/2" square drive and work with both pneumatic air wrenches and electric impact drivers.

Each socket measures 30mm deep, making them a solid choice for longer bolt stems found in engine bays and chassis assemblies. A socket rail is included to keep all 17 pieces in order between jobs.

Key Features and Benefits

• Chrome molybdenum steel: handles the shock loads from air and electric impact tools without cracking or deforming
• Black phosphate coating: protects bare metal from corrosion during storage and frequent use
• Low profile body: reaches fasteners in tight, recessed, or restricted areas where standard sockets cannot fit
• 1/2" drive compatibility: works with pneumatic air wrenches, cordless impact drivers, and breaker bars
• Hex drive profile: grips fasteners firmly under high torque, reducing the risk of rounding bolt heads
• 30mm socket depth: clears longer bolt stems common in engine, chassis, and suspension work
• 17 metric sizes in one set: covers the most frequently needed sizes from 8mm through to 24mm
• Included socket rail: holds every piece in its slot so the set stays complete between jobs
• Professional and home workshop use: suited to both trade mechanics and regular workshop users

Specs & Attributes

• Drive size: 1/2"
• Drive type: Hex
• Socket depth: 30mm
• Material: Chrome molybdenum
• Finish: Black phosphate
• Number of pieces: 17
• Size range: 8mm - 24mm
• Sizes included: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24mm
• Weight: 1.3kg

Typical Applications

• Removing and refitting wheel nuts and hub bolts
• Engine bay work where socket clearance is restricted
• Suspension strut and chassis bolt removal
• Brake caliper and disc removal
• Exhaust manifold stud and nut work
• General automotive servicing and maintenance
• Commercial vehicle and plant machinery repair
• Workshop fabrication and mechanical assembly

How to Use

• Select the size: Match the socket to the fastener head before starting. Using the wrong size risks rounding the bolt.

• Attach to your drive tool: Push the socket firmly onto the 1/2" square drive of your impact wrench, ratchet, or breaker bar until it clicks into place.

• Position squarely: Place the socket straight onto the fastener head. Angled engagement under impact can damage both the socket and the fastener.

• Apply torque: Drive clockwise to tighten or anticlockwise to loosen. Use your impact tool's torque settings where available to avoid over-tightening.

• Return to the rail: After use, place each socket back onto the rail in its correct position. This keeps the set complete and makes size selection faster next time.

Frequently Asked Questions (FAQs)

• What is the difference between impact sockets and standard chrome vanadium sockets?
  Impact sockets use a tougher alloy (such as chrome molybdenum) and have thicker walls to absorb the repeated shock loads from power impact tools. Standard chrome vanadium sockets have thinner walls, which can crack or shatter under the same conditions. Always use impact-rated sockets with air and electric impact wrenches.

• Can impact sockets be used with a hand ratchet or breaker bar?
  Yes. Impact sockets are fully compatible with standard 1/2" ratchet handles, breaker bars, and torque wrenches. The thicker walls mean slightly less clearance in some spaces, but there is no technical issue using them with hand tools.

• What does "low profile" mean on an impact socket?
  A low profile socket has a shorter outer body than a standard socket of the same drive size. This shorter height lets it fit inside recessed areas, around bodywork, or in cavities where a taller socket head would contact surrounding parts before reaching the fastener.

• Why are impact sockets finished in black rather than polished chrome?
  Impact sockets need thicker walls to handle shock loads, which makes a polished chrome finish impractical. The black oxide or phosphate coating used instead provides corrosion resistance without adding thickness, and it is far less likely to flake or peel under heavy use than a chrome layer would be.

• Are metric and AF (imperial) sockets interchangeable in practice?
  No. Metric and AF sockets are not interchangeable. While some sizes are close in measurement, using the wrong type risks rounding fastener heads. Always match the socket type - metric or AF - to the fastener specification on the vehicle or equipment you are working on.

Summary

The Blue Spot 17-piece 1/2" metric low profile impact socket set brings together 17 commonly needed sizes from 8mm to 24mm on a single storage rail. Chrome molybdenum steel and a black phosphate finish make these sockets built for regular use with air and electric impact tools. The set is backed by the Blue Spot Tools manufacturer's lifetime guarantee.