Cromar Cromaprufe DPM Damp Proof Liquid Membrane 5 Litre ACP-501

Cromar Cromaprufe DPM Damp Proof Liquid Waterproofing Membrane 5 Litre ACP-501

MPN: ACP/501

Barcode: 5036684004428

Colour: Black

Product Overview:

Cromar Cromaprufe can also suitable for use as an adhesive for wood floor block, mosaic panels, insulation boards, expanded polystyrene, cork and as a plaster bonding agent, even on difficult surfaces.

Cromar Cromaprufe is a high-performance damp proof membrane (DPM) supplied as a ready-to-use, brush-applied liquid. Presented in a 5-litre container, this waterproofing solution forms a flexible, seamless membrane ideal for protecting floors, walls, and other structures against moisture ingress. Designed for both horizontal and vertical applications, Cromaprufe is suitable for use as a water-proofer, DPM, or vapour barrier in new construction and refurbishment projects.

• Cromar Cromaprufe DPM 5 litre is a rubberised enriched bitumen emulsion water proofing membrane that's brown upon application but dries black.
• General purpose product used on walls and floors to prevent water ingress and dampness from the ground or surrounding areas.
  
• Acts as a water proofer for floors and walls, above ground structures and foundations.
  
• Provides a highly effective sandwich damp-proof membrane for floors and walls.
• Cromaprufe will provide a waterproof membrane on concrete and brick foundations, retaining walls and bridge abutments.
  
• It protects concrete structures against attack by sulphates present in soils.
  
• May be used internally and externally.

Cromaprufe Uses:

Forms an impervious water and water vapour Tanking barrier on most surfaces both Internally or externally.

May also be used as an adhesive or bonding aid, low hazard with water clean up, provides sandwich damp-proof membranes for floors, general Waterproofing for use on concrete, fiber cement, render, plaster, for waterproofing structures such as bridge abutments, retaining walls, Culverts, for fixing wood blocks and wooden mosaic flooring, as a bonding agent for plastering difficult substrates such as glazed tiles, for fixing insulation boards, expanded polystyrene and cork slabs, as a curing agent for concrete.

Cromaprufe Damp Proof Liquid Coating Key Features:

• Liquid-applied damp proof membrane (DPM)

• Forms a flexible and seamless waterproof barrier

• Excellent adhesion to concrete, brick, block, and stone

• Easy to apply by brush or roller – no mixing required

• Suitable for vertical and horizontal surfaces

• Can be used as a vapour barrier or water proofer

• Quick drying and low odour

Cromaprufe Applications:

• Damp proofing concrete floors before screeding

• Waterproofing walls, foundations, and basements

• Acting as a vapour control layer below timber floors

• Protection against rising or penetrating damp

• Suitable for use under insulation or floor finishes

Application Instructions:

1. All surfaces should be sound, stable and free from dust, dirt, grease, oil and all loose matter.
2. Cromaprufe may be applied to damp but not waterlogged surfaces.
3. Porous and hot dry surfaces should be dampened with clean cold water to assist the application of the product.

Approximate Coverage:

• 2 meters square per litre depending on surface per coat
• 2 coats recommended

Product Limitations:

Do not apply when rain is imminent

The product may bleed through any paints subsequently applied over it.

Apply a primer recommended by the paint manufacturer before over painting. Always read the technical data sheet before use and for full application information and instructions.

(Please note that tins may get dented in transit and this is not a reason for return please do not purchase tined products if this is an issue for yourself.)