Everbuild Floor Varnish Clear Gloss 750ml Tin
Barcode 5029347612580
Sika Code 488529
Code FLOORVGL07
Everbuild 750ml Ultra Hard Floor Varnish has been specifically developed to
provide an ultra-hard scratch resistant natural finish to most interior
wooden floors.
Suitable for use in kitchens, bathrooms, lounge, dining areas or where heavy foot traffic would be expected.
Ultra
hard quick drying floor varnish that can be use on most common types of
wooden floors including hardwood, softwood, hardboard, chipboard and composite wooden boards.
Specification and Main Points
- Low Solvent Formula
- Touch dry in 30 minutes.
- Protects wood against scratches and spills.
- Clear finish, no discoloration.
Surface Preparation
un-varnished floors
- Ensure wood is clean, dry and free from dirt or dust by wiping with a soft cloth and white spirit.
- Any existing coatings must be removed prior to application with a suitable sander using 120 grade abrasive paper.
- A suitable dust mask should be worn while sanding.
- Allow any dust to settle then vacuum the floor to remove any dust or debris.
- Fill in any holes or surface imperfections using Everbuild Multi-Purpose Wood Filler.
Existing varnished floors
- Should be thoroughly sanded using 120 grade abrasive paper to provide a key for the varnish to be applied.
- Floors should be vacuumed, wiped down with white spirit and allowed to dry.
- Any existing varnish in poor condition should be completely removed prior to application.
Floor Varnish Application:
- Stir product well before use and periodically during application.
- Brush apply Everbuild Ultra Hard Floor Varnish following the direction of the wood grain.
- Apply a minimum of 3 coats allowing 1 hour between coats.
- Lightly sand the surface before applying the final coat.
- Always
apply the varnish to a wet edge working systematically across the
surface keeping the wet edge together as much as possible to avoid
overlap.
Ultra Hard Floor Varnish
- Can be walked on after approximately 8 hours depending on ambient temperature and conditions.
- Allow 72 hours before subjecting to heavy foot traffic.
- Do not cover with carpets or rugs for at least 7 days.
- Protect from water for 5 days.
- Clean brushes thoroughly after use with warm soapy water.
FLOORVGL07 Everbuild Data Sheets
Everbuild 750ml Ultra Hard Floor Varnish Technical Data Sheet
Everbuild 750ml Ultra Hard Floor Varnish Safety Data Sheet
Manufacturer Floor Varnish Product Page
Data |
Manufacturer |
Everbuild |
Reference Code |
FLOORVGL07 |
Reference Code sika |
488529 |
Type |
Ultra Hard Floor Varnish |
Size |
750ml |
Colour |
Clear |