Everbuild Floor Varnish Clear Gloss 2.5 Litre FLOORVGL2

Everbuild Ultra Hard Floor Varnish Clear Gloss 2.5 Litre

Barcode 5029347612597

Sika 488530

MPN FLOORVGL2

Everbuild 2.5 Litre Ultra Hard Floor Varnish has been specifically developed to provide an ultra-hard scratch resistant natural finish to most interior wooden floors.

Suitable for use in kitchens, bathrooms, lounge, dining areas or where heavy foot traffic would be expected.

Ultra hard quick drying floor varnish that can be use on most common types of wooden floors including hardwood, softwood, hardboard, chipboard and composite wooden boards.

Specification and Main Points

• Low Solvent Formula
• Touch dry in 30 minutes.
• Protects wood against scratches and spills.
• Clear finish, no discoloration.

Surface Preparation

un-varnished floors:

1. Ensure wood is clean, dry and free from dirt or dust by wiping with a soft cloth and white spirit.
2. Any existing coatings must be removed prior to application with a suitable sander using 120 grade abrasive paper.
3. A suitable dust mask should be worn while sanding.
4. Allow any dust to settle then vacuum the floor to remove any dust or debris.
5. Fill in any holes or surface imperfections using Everbuild Multi-Purpose Wood Filler.

Existing varnished floors:

1. Should be thoroughly sanded using 120 grade abrasive paper to provide a key for the varnish to be applied.
2. Floors should be vacuumed, wiped down with white spirit and allowed to dry.
3. Any existing varnish in poor condition should be completely removed prior to application.

Floor Varnish Application:

1. Stir product well before use and periodically during application.
2. Brush apply Everbuild Ultra Hard Floor Varnish following the direction of the wood grain.
3. Apply a minimum of 3 coats allowing 1 hour between coats.
4. Lightly sand the surface before applying the final coat.
5. Always apply the varnish to a wet edge working systematically across the surface keeping the wet edge together as much as possible to avoid overlap.

Ultra Hard Floor Varnish

Can be walked on after approximately 8 hours depending on ambient temperature and conditions.

Allow 72 hours before subjecting to heavy foot traffic.

Do not cover with carpets or rugs for at least 7 days.

Protect from water for 5 days.

Clean brushes thoroughly after use with warm soapy water.

FLOORVGL2 Everbuild Data Sheets:

Everbuild Ultra Hard Floor Varnish 2.5 Litre Technical Data Sheet

Everbuild Ultra Hard Floor Varnish 2.5 Litre Safety Data Sheet

Manufacturer Floor Varnish Product Page

(Please note that tins may get dented in transit and this is not a reason for return please do not purchase tined products if this is an issue for yourself.)