Triton Sanding Belt 100 x 610mm 60g 5pk 794958

Triton Sanding Belt - 100mm x 610mm - 60 grit - Pack of 5

Barcode: 5024763138065

MPN: 794958

Overview:

The Triton Sanding Belt 100 x 610mm 60 Grit (Pack of 5) a high-performance replacement belt set designed to fit belt sanders that take 100mm x 610mm belts. With a 60 grit grade, these belts are ideal for coarse sanding and surface preparation great for removing material faster than medium grades while leaving a more controlled finish than very coarse abrasives. Manufactured from aluminium oxide abrasive with a phenolic resin bonding agent, they deliver reliable cutting action and durability. The heavy-duty X-weight cloth backing improves strength and belt life, while the fully top-skived joint helps reduce chatter and improves tear resistance. A closed coat grain layout provides a high removal rate for efficient sanding across a wide range of materials.

Key Features

• 100mm x 610mm sanding belts for compatible belt sanders

• 60 grit coarse grade for fast sanding and surface preparation

• Aluminium oxide abrasive with phenolic resin bonding for durability

• Heavy-duty X-weight cloth backing for strength and long service life

• Fully top-skived joint helps reduce chatter and improves tear resistance

• Closed coat abrasive for high removal rate and consistent results

• Suitable for composites, wood, metal, paint and varnish

• Supplied as a pack of 5 belts

Specifications

• Brand: Triton

• Product Type: Belt Sander Sanding Belts

• Size: 100mm x 610mm

• Grit / Grade: 60 grit

• Pack Size: 5

• Abrasive Material: Aluminium oxide

• Bonding Agent: Phenolic resin

• Backing Cloth Weight: X-weight

• Joint: Fully top-skived

• Coat Type: Closed coat

• MPN: 794958

Applications

• Coarse sanding and levelling on timber

• Surface prep prior to finer sanding, staining or finishing

• Removing old finishes and coatings

• Sanding composites and fillers

• Metal sanding and cleaning tasks

How to Use

• Confirm your belt sander uses 100mm x 610mm belts

• Fit the belt in the correct running direction (follow arrows if present)

• Tension and track the belt as per your sander manufacturer instructions

• Sand with steady movement and avoid holding in one area

• Use dust extraction where possible to reduce clogging and improve belt life

• Extend belt life by using an abrasive cleaning block to remove build-up

Triton 100 x 610mm 60 Grit Belts 794958 – Key FAQs

• What is 60 grit best used for?
  60 grit is a coarse grade suited to faster sanding and surface preparation before moving to medium and fine grits for finishing.

• Will these belts fit my belt sander?
  They fit any belt sander that uses 100mm x 610mm belts. Always check your machine specifications before ordering.

• What does closed coat mean on a sanding belt?
  Closed coat means more abrasive grain coverage, which usually increases cutting speed and removal rate.

• What is the benefit of X-weight cloth backing?
  X-weight backing is heavy duty and helps resist tearing under belt sander loads, improving durability and belt life.

• What does top-skived mean?
  A top-skived joint is tapered for a smoother seam, helping reduce chatter and improving tear resistance during sanding.

• How can I make these belts last longer?
  Using an abrasive cleaning block to remove clogging and running good dust extraction will help maintain performance and extend usable belt life.

You can extend the life of your discs by using a sanding disc and belt cleaning block this removes clogging simply and efficiently.

See the complete Abrasives and Glass Papers Range.