Triton Sanding Belt 100 x 610mm 40g 5pk 527343

Triton Sanding Belt - 100 x 610mm - 40 grit - Pack of 5

Barcode: 5024763138003

MPN: 527343

Overview:

The Triton Sanding Belt 100 x 610mm 40 Grit (Pack of 5) 527343 is a heavy-duty, very coarse abrasive belt set designed to fit belt sanders that take 100mm x 610mm belts. With a 40 grit grade, these belts are ideal for rapid stock removal, stripping and aggressive sanding where speed matters. Manufactured using aluminium oxide abrasive with a phenolic resin bonding agent, they deliver consistent cutting action, while the heavy-duty X-weight cloth backing improves strength, tear resistance and belt life. A fully top-skived joint helps reduce chatter for smoother running, and the closed coat grain layout provides a high removal rate with controlled results across a wide range of materials.

Key Features

• 100mm x 610mm sanding belts for compatible belt sanders

• 40 grit very coarse grade for fast stripping and material removal

• Aluminium oxide abrasive with phenolic resin bonding for durability

• Heavy-duty X-weight cloth backing for strength and longer belt life

• Fully top-skived joint helps reduce chatter and improves tear resistance

• Closed coat abrasive for higher removal rate and consistent performance

• Suitable for composites, wood, metal, paint and varnish (application dependent)

• Supplied as a pack of 5 belts

Specifications

• Brand: Triton

• Product Type: Belt Sander Sanding Belts

• Size: 100mm x 610mm

• Grit / Grade: 40 grit (very coarse)

• Pack Size: 5

• Abrasive Material: Aluminium oxide

• Bonding Agent: Phenolic resin

• Backing: X-weight cloth

• Joint: Fully top-skived

• Coat Type: Closed coat

• MPN: 527343

Applications

• Rapid stripping and heavy stock removal on timber

• Removing old paint and coatings

• Shaping and levelling wood and sheet materials

• Aggressive sanding on composites and fillers

• Metal sanding and cleaning tasks

How to Use

• Confirm your belt sander uses 100mm x 610mm belts

• Fit the belt in the correct running direction (follow arrows if present)

• Tension and track the belt according to your sander’s instructions

• Use steady movement and avoid holding in one place to prevent gouging

• Use dust extraction where possible to reduce clogging and improve belt life

• Extend usability with an abrasive cleaning block to remove built-up clogging

Triton 100 x 610mm 40 Grit Belts 527343 – Key FAQs

• What is 40 grit best used for?
  40 grit is very coarse and best for fast material removal, stripping finishes and aggressive sanding before moving to finer grits.

• Will these belts fit my belt sander?
  They fit any belt sander that uses 100mm x 610mm sanding belts. Always check your machine’s belt size before ordering.

• What does X-weight cloth backing do?
  X-weight backing is heavy duty and helps improve tear resistance and durability, making it better suited to belt sander loads.

• What is a top-skived joint?
  A top-skived joint is tapered for a smoother seam, helping reduce chatter and improving belt strength during sanding.

• What materials can I use these belts on?
  They’re suitable for composites, wood, metal, paint and varnish depending on the task and technique. Choose the correct grit for your application.

• How can I make sanding belts last longer?
  Using an abrasive cleaning block to remove built-up dust and resin reduces clogging and helps the belt cut more effectively for longer.

You can extend the life of your discs by using a sanding disc and belt cleaning block,  this removes clogging simply and efficiently.

See the complete Abrasives and Glass Papers Range.