Triton Belt Sander Sanding Belt 76mm x 533mm 60g 5pk 739072

Triton Belt Sander Sanding Belt 76mm x 533mm 60g - Pack of 5

Barcode: 5024763138249

MPN: 739072

Grit Grade: 60 Grit

Overview:

The Triton Belt Sander Sanding Belt 76mm x 533mm 60 Grit (Pack of 5) is a high-performance replacement belt set for the Triton TA1200BS and any other belt sander that takes 76 x 533mm belts. With a 60 grit abrasive grade, these belts are ideal for quicker stock removal, stripping and shaping work before moving on to finer grits. Manufactured with quality aluminium oxide abrasive and a phenolic resin bonding agent, they deliver consistent cutting action, while the heavy-duty X-weight cloth backing improves strength and belt life. A fully top-skived joint helps reduce chatter and improves tear resistance, and the closed coat grain layout supports a high removal rate with a more controlled finish.

Key Features

• 76mm x 533mm sanding belts to suit TA1200BS and compatible sanders

• 60 grit grade for faster material removal and stripping work

• Aluminium oxide abrasive with phenolic resin bonding for durability

• Heavy-duty X-weight cloth backing for long life and high performance

• Fully top-skived joint helps reduce chatter and improves tear resistance

• Closed coat abrasive for higher removal rate and consistent sanding

• Suitable for composites, wood, metal, paint and varnish (application dependent)

• Supplied as a pack of 5 belts

Specifications

• Brand: Triton

• Product Type: Belt Sander Sanding Belts

• Size: 76mm x 533mm

• Grit / Grade: 60 grit

• Pack Size: 5

• Abrasive Material: Aluminium oxide

• Bonding Agent: Phenolic resin

• Backing: X-weight cloth

• Joint: Fully top-skived

• Coat Type: Closed coat

• MPN: 739072

Applications

• Stripping and rapid sanding of timber

• Shaping and levelling wood and sheet materials

• Removing coatings such as paint and varnish (application dependent)

• Preparing composites and fillers

• Metal sanding and cleaning tasks (application dependent)

How to Use

• Confirm your belt sander uses 76mm x 533mm belts

• Fit the belt in the correct running direction (follow belt arrows if present)

• Tension and track the belt according to your sander instructions

• Use steady movement and avoid staying in one spot to prevent gouging

• Use dust extraction where possible for cleaner sanding and longer belt life

• Extend belt usability by using an abrasive cleaning block to remove clogging

Triton 76mm x 533mm 60 Grit Belts 739072 – Key FAQs

• What is 60 grit best used for on a belt sander?
  60 grit is a coarser sanding grade suited to faster stock removal, stripping finishes and shaping work before refining with finer belts.

• Will these belts fit non-Triton sanders?
  Yes any sander that takes 76mm x 533mm belts can use them. Always check your belt size and your machine’s requirements.

• What does closed coat abrasive mean?
  Closed coat means more abrasive grain coverage on the belt surface, typically giving a higher removal rate and more aggressive cutting.

• What is the benefit of X-weight cloth backing?
  X-weight backing is heavier duty and more tear resistant, helping the belt handle belt-sander loads and last longer.

• Why is a top-skived joint important?
  A top-skived joint is tapered for a smoother seam, helping reduce chatter and improving belt durability when running at speed.

• How can I make sanding belts last longer?
  Using an abrasive cleaning block to remove built-up dust and resin is a simple way to reduce clogging and extend belt life.

Guide to the grits

40 grit is a coarser abrasive 240 grit is a finer abrasive.

By using an abrasive cleaning block you can extend the usability and life of the sanding belts by removing the clogging this is a simply and efficient method.