Triton Belt Sander Sanding Belt 76mm x 533mm 100g 5pk 689327

Triton 100g Belt Sander Sanding Belt 76mm x 533mm Pack of 5

Barcode: 5024763138256

MPN: 689327

Grade: 100 Grit

Overview:

The Triton Belt Sander Sanding Belt 76mm x 533mm 100 Grit (Pack of 5) a high-performance replacement belt set designed for the Triton TA1200BS and any other belt sander that takes 76 x 533mm belts. Made with quality aluminium oxide abrasive and a phenolic resin bonding agent, these belts deliver consistent cutting power for fast, controlled sanding. The heavy-duty X-weight cloth backing improves durability for longer service life, while the fully top-skived joint helps reduce chatter and improves tear resistance for smoother running. With a closed coat grain layout, they provide a high removal rate while still producing a clean, even finish ideal for general sanding and surface preparation.

Key Features

• 76mm x 533mm sanding belts to suit TA1200BS and compatible sanders

• 100 grit grade for general sanding and surface preparation

• Aluminium oxide abrasive with phenolic resin bonding for consistent performance

• Heavy-duty X-weight cloth backing for strength and long belt life

• Fully top-skived joint helps reduce chatter and improves tear resistance

• Closed coat abrasive for higher removal rate and smoother finish

• Suitable for stripping, sanding and finishing a wide range of materials

• Supplied as a pack of 5 belts

Specifications

• Brand: Triton

• Product Type: Belt Sander Sanding Belts

• Size: 76mm x 533mm

• Grit / Grade: 100 grit

• Pack Size: 5

• Abrasive Material: Aluminium oxide

• Bonding Agent: Phenolic resin

• Backing: X-weight cloth

• Joint: Fully top-skived

• Coat Type: Closed coat

• MPN: 689327

Applications

• General sanding and smoothing of timber

• Surface preparation on composites and sheet materials

• Sanding and keying paint and varnish

• Material removal and finishing stages on metal

• Workshop, trade and DIY sanding tasks with belt sanders

How to Use

• Confirm your sander takes 76mm x 533mm belts

• Fit the belt in the correct direction (follow any arrows if present)

• Tension and track the belt according to your sander instructions

• Sand with steady movement and avoid holding in one spot

• Use appropriate dust extraction where possible for best results

• Extend belt life by cleaning with an abrasive cleaning block to remove clogging

Triton 76mm x 533mm 100 Grit Belts 689327 – Key FAQs

• What is 100 grit best used for on a belt sander?
  100 grit is a good general-purpose grade for smoothing and surface prep coarser than finishing grits, but finer than heavy stock removal belts.

• Will these belts fit sanders other than Triton?
  Yes any belt sander that uses 76mm x 533mm belts can use them, including the Triton TA1200BS. 76 x 533mm is a very popular size for belt sanders.

• What does X-weight cloth backing mean?
  X-weight cloth backing is a heavy-duty backing designed to handle belt sander loads, improving strength, tear resistance and belt life.

• What is a top-skived joint and why does it matter?
  A top-skived joint is tapered for a smoother seam, helping reduce chatter and improving durability when the belt runs at speed.

• What materials can I sand with these belts?
  They’re suitable for composites, wood, metal, paint and varnish depending on the task and technique. Always match grit choice to the job.

• How can I make sanding belts last longer?
  Using an abrasive cleaning block to remove built-up dust and resin is a simple way to reduce clogging and extend belt usability.

Guide to the Grits

40 grit is a coarser abrasive 240 grit is a finer abrasive.

By using an abrasive cleaning block you can extend the usability and life of the sanding belts by removing the clogging this is a simply and efficient method.