Toupret Wood Repair Filler White Int Ext Paint or Stain 1kg TTREPBOW01GB

Toupret Wood Repair Filler White Int/Ext - Paint or Stain - 1kg (TTREPBOW01GB)

MPN: TTREPBOW01GB

Barcode: 3178310022177

Colour: White

Weight: 1kg

Overview:

Toupret Wood Repair Filler White is a fast-setting powder filler for interior and exterior wood. It sets without a depth limit, bonds firmly, and accepts shaping once applied. Compatible with all conventional paints, varnishes, and stains, it delivers a surface ready for overcoating in just 3 hours.

The filler works on all types of wood - from standard softwoods to exotic hardwoods, chipboard, and plywood. Once dry, it sands cleanly and accepts screws and drill bits without crumbling.

Mix at a ratio of 330ml water per 1kg of powder, then apply directly with a filling knife or trowel. A 1kg bag yields 1 litre of mixed filler. Apply in temperatures between 5°C and 35°C with relative humidity below 80%.

Key Features and Benefits

• Ready to overcoat in 3 hours: accepts paint, varnish, or stain after full drying under normal conditions.
• No depth limit: apply in a single pass regardless of how deep the repair needs to be.
• 30-minute working time: allows sufficient time for shaping and form work before the filler sets.
• Can be drilled and screwed: once fully dry, the repair holds fixings without crumbling.
• Easy to sand: the set filler cuts back smoothly for a clean, flat finish.
• Low odour: suitable for use in occupied or poorly ventilated spaces.
• Compatible with all finishes: works under conventional paints, varnishes, and stains.
• Broad substrate compatibility: adheres to standard timber, exotic species, chipboard, and plywood.
• Strong adhesion: confirmed at more than 0.8 MPa in accordance with NFT 30-608.
• Consistent mix ratio: add 330ml of water per 1kg of powder for a reliable result every time.
• High yield: 1kg of powder produces 1 litre of mixed filler.
• 6-month product guarantee: when stored in original sealed packaging, away from humidity.

Typical Applications

• Filling holes, gaps, and cracks in interior & exterior timber
• Shaping and form work on wooden surfaces
• Repairs to chipboard and plywood panels
• Restoration work on exotic wood species
• Pre-paint preparation on wooden doors, window frames, and skirting boards
• Deep-fill repairs where a standard depth-limited filler would fall short
• Structural repairs that require screwing or drilling after the filler has set

How to Use

• Prepare the surface: the surface must be hard, clean, dry, and sound. Remove any loose material, dust, or contaminants before applying.

• Mix: pour 330ml of cold water per 1kg of powder into a clean container. Add the powder to the water and stir until the mixture is smooth and lump-free.

• Apply: use a filling knife, wall scraper, or trowel to work the filler into the repair. There is no depth limit, so fill in a single pass where needed.

• Allow to dry: leave the filler for at least 3 hours before overcoating. Thicker applications, lower temperatures, or higher humidity will extend drying time.

• Sand: once fully dry, sand the repair back to a smooth, flat finish. Always wear a dust mask (minimum P2) when sanding.

• Overcoat: apply any conventional paint, varnish, or stain over the prepared surface.

Frequently Asked Questions (FAQs)

• How long does Toupret Wood Repair Filler take to dry before painting?
  The filler reaches a paintable state in around 3 hours under normal conditions (20°C, 50% relative humidity). Cooler temperatures, higher humidity, or thicker applications will all extend this time.

• Can wood filler be used on exterior wood?
  Yes. This product is formulated for both interior and exterior use. Apply only within the recommended temperature range of 5°C to 35°C and at a relative humidity below 80%.

• What types of wood is this filler compatible with?
  It bonds to all types of wood, including common exotic species, chipboard, and plywood. For porous or deteriorated timber, apply Toupret Wood Hardener to the substrate first for best results.

• Can wood filler be drilled or screwed after it has set?
  Yes. Once fully dry, this filler accepts screws and drill bits without crumbling. This makes it practical for structural repairs as well as cosmetic filling work.

• How do you mix Toupret Wood Repair Filler?
  Add 330ml of room-temperature water per 1kg of powder. Pour the powder into the water and stir until you have a smooth, consistent mix with no lumps. Use the mixed filler within 30 minutes.

Summary

Toupret Wood Repair Filler White (1kg) is a professional powder filler for filling, shaping, and repairing wood indoors and out. It sets firm, sands back cleanly, and accepts paint, varnish, or stain in just 3 hours. With no depth limit and a clear-cut 33% mix ratio, it suits a wide range of timber repairs on standard and exotic wood species.

"Always read the Toupret Wood Repair Powder Filler White Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."