Toupret Decorators Wood Hardener Int Ext 1 Litre Liquid TTDURBO01GB

Toupret Decorators Wood Hardener Int Ext 1 Litre Liquid TTDURBO01GB

MPN: TTDURBO01GB

Barcode: 3178310018828

Size: 1L

Colour: White (colourless when dry)

Overview:

Toupret Decorators Wood Hardener Liquid (1L) is a deep-penetrating, water-based treatment for toughening rotten wood ahead of filling or overcoating. It bonds to both dry and damp wood on interior and exterior surfaces, restoring structural integrity before further repair work begins.

The formula penetrates degraded wood fibres and creates a stable base that improves adhesion for fillers, paints, varnishes, and stains. Coverage runs at approximately 6-8m² per litre, depending on the condition and porosity of the wood.

Supplied ready to use in a 1L reusable tin - complete with a brush in the screw top - it requires no mixing and tools clean up with water. The surface is ready to overcoat within 24 hours of application.

Key Features and Benefits

• Deep-penetrating formula: Soaks into degraded wood fibres to toughen rotten or soft areas before repair.
• Bonds to damp wood: Adheres to both dry and damp surfaces, suited to exterior conditions where moisture is present.
• Interior and exterior use: Approved for use on both internal and external wooden substrates.
• Water-based with low VOC: Contains less than 0.5% VOC, in line with Directive 2004/42/CE.
• Ready to use: No mixing required - apply directly from the tin.
• Good coverage rate: Covers approximately 6-8m² per litre, depending on substrate type.
• Wide substrate compatibility: Suitable for all absorbent wood types, including exotic species, chipboard, and plywood.
• Improves adhesion: Creates a better bonding surface for Toupret wood fillers, paints, varnishes, and stains.
• Quick overcoating: Ready to paint or fill within 24 hours of application.
• Easy clean-up: Tools wash out with water immediately after use.
• Reusable tin: Supplied in a 1L tin with a brush included in the screw top.
• 12-month guarantee: Guaranteed for 12 months from purchase when stored correctly.

Typical Applications

• Toughening rotten window frames and sills before filling and repainting.
• Treating degraded exterior joinery ahead of overcoating with paint or varnish.
• Preparing chipboard and plywood surfaces for filling and finishing work.
• Stabilising damp or highly absorbent wood before applying a coating.
• Pre-treatment for exotic hardwood species prior to repair or decoration.
• Consolidating soft or spongy interior woodwork before filler application.
• Priming stripped or sanded wooden substrates to improve coating adhesion.

How to Use

• Prepare the surface: Sand or strip the wood beforehand. Remove all loose material. The surface must be cohesive and clean. Do not apply to soggy or waterlogged wood.

• Check conditions: Only apply at temperatures between 5°C and 35°C and at a relative humidity below 80%.

• Apply the hardener: Use a brush or roller to apply the product directly from the tin. No mixing is needed.

• Allow to dry: Leave the product to dry fully before applying filler or a further coat. Setting times vary with substrate type, coat thickness, and ambient conditions.

• Overcoat: Once dry, overcoat with any Toupret wood filler, conventional paint, varnish, or stain. Average overcoating time is 24 hours.

• Clean tools: Wash all application tools with water immediately after use.

Frequently Asked Questions (FAQs)

• Can wood hardener be applied to damp wood?
  Yes. This product adheres to both dry and damp wood, making it well-suited to exterior repairs where some moisture is present. However, do not apply this product to wood that is soggy or waterlogged, as this will affect performance.

• How long after applying wood hardener can I paint or fill?
  On average, the surface is ready to overcoat after 24 hours. This can vary depending on the thickness of the coat, the type of substrate, and the temperature and humidity at the time of application.

• What types of wood can this product be used on?
  It works on all absorbent wood types - dry or damp - including exotic species, chipboard, and plywood. The surface should be sanded or stripped before application.

• Is Toupret Wood Hardener safe to use indoors?
  Yes. The formula is water-based with a VOC content below 0.5%, rendering it suitable for interior use. Wear gloves and safety glasses during application, and make sure the work area is well ventilated.

• Does wood hardener replace a wood filler?
  No. Wood hardener is a pre-treatment, not a filler. It toughens and stabilises rotten wood to create a sound base, after which a suitable wood filler can be applied to repair surface defects.

Summary

Toupret Decorators Wood Hardener is a water-based, deep-penetrating treatment that toughens rotten or degraded wood before filling or overcoating on interior and exterior surfaces. With coverage of approximately 6-8m² per litre and a 24-hour overcoating time, this ready-to-use formula in a 1L reusable tin makes it a sensible option for decorators and tradespeople carrying out wood repair work.

"Always read the Toupret Decorators Wood Hardener Liquid Technical Datasheet prior to first use to make sure that you have the correct information and product for your application."