Blue Spot Tools 25mm x 6m/20ft Heavy Duty Ratchet Tie Down Straps
MPN: 45405
Barcode: 5028734454055
Size: 25mm x 6m/20ft
Weight: 0.39kg
Overview:
The Blue Spot Tools ratchet tie down straps secure up to 400kg on bikes, small trailers, and lighter vehicles. A metal ratchet buckle and double J hooks deliver firm, incremental tension in a compact, lightweight assembly.
The 25mm webbing suits bicycle frames, small trailer rails, and narrower cargo profiles. At 6m, the strap spans most smaller vehicle and trailer setups.
Key Features and Benefits
Specs & Attributes
Typical Applications
How to Use
Confirm Load Weight: Check the cargo weight falls within the strap's maximum load capacity before starting.
Clip the First Hook: Attach one J hook to a fixed anchor point on the trailer, rack, or securing fixture.
Thread and Extend: Open the ratchet flat, feed the loose webbing end through the central spool, and draw it over the load to the second anchor point.
Clip the Second Hook: Fasten the remaining J hook to the anchor point on the far side of the cargo.
Apply Tension: Pump the ratchet lever until the webbing sits firm and taut over the load.
Frequently Asked Questions (FAQs)
Can ratchet strap webbing get wet?
The strap webbing is water-resistant rather than fully waterproof. It handles exposure to rain during transport but absorbs moisture when saturated. Dry the webbing fully before storing to prevent mould or mildew from developing in the fabric.
How should ratchet straps be stored when not in use?
Store in a dry area away from direct sunlight and moisture. Roll or fold the webbing to avoid sharp kinks, and keep metal components away from prolonged damp. Allow any wet strap to air dry fully before storing to prevent surface corrosion on the metal hardware.
How do I stop a ratchet strap from scratching a bicycle frame or painted surface?
Wrap a piece of foam, cloth, or a purpose-made strap sleeve between the webbing and any painted or polished surface. Attach the J hooks to trailer anchor points only - not directly to the bike frame or any non-structural component.
How do I know when a ratchet strap needs replacing?
Check the webbing for cuts, fraying, or discolouration before each use. Remove any strap from service that shows worn stitching, weakened webbing, or a damaged ratchet mechanism and replace it. A strap that fails to hold tension or shows visible structural damage must not be used.
How do I thread webbing through a ratchet buckle?
Open the ratchet mechanism fully to the flat release position. Feed the free webbing end down into the central spool slot and pull it through from the other side. Wind the ratchet until the webbing seats correctly in the spool before applying tension.
Summary
Blue Spot Tools 25mm x 6m/20ft ratchet tie down straps (45405) handle up to 400kg for bikes, motorcycles, small boats, and lighter trailer loads. Double J hooks and a metal ratchet buckle maintain tension through the narrow webbing. This product is backed by the Blue Spot Tools Lifetime Guarantee.
| Data | |
| Reference Code | 45405 |
| Size | 25mm x 6m/20ft |
| Weight | 0.39kg |
| Guarantee | Blue Spot Tools Lifetime Guarantee |
| Name | Link |
|---|---|
| Blue Spot Tool Lifetime Guarantee | Download Attachment |
£35.39 £13.33 £15.99 Inc. VAT
£15.74 £8.40 £10.08 Inc. VAT
£6.29 £3.15 £3.78 Inc. VAT
£15.74 £7.79 £9.35 Inc. VAT
£19.12 £10.19 £12.23 Inc. VAT
£20.49 £13.32 £15.98 Inc. VAT