Blue Spot Tools 3PC Paint Paddle Mixer Set 84mm-58mm 36105

Blue Spot Tools 3 Piece Paint Paddle Mixing Mixer Set

MPN: 36105

Barcode: 5028734361056

Size: 2 x 395mm, 1 x 355mm

Weight: 0.53kg

Overview:

The Blue Spot Tools 3 Piece Paint Paddle Mixer Set contains three drill-driven mixing attachments. They cover both high and low viscosity paints. Two carbon steel paddles with 84mm and 58mm mixing heads attach via an 8mm hexagonal shaft.

The third paddle measures 355mm in length and uses a 60mm plastic head on a 6mm round shaft. All three attach to most standard electric drills without adapters. The two carbon steel paddles carry a zinc and powder coat finish to resist corrosion.

What's Included

• 8mm Hexagonal Shaft:
  • 1 x 395mm carbon steel mixer with 84mm mixing head
  • 1 x 395mm carbon steel mixer with 58mm mixing head
• 6mm Round Shaft:
  • 1 x 355mm mixer with 60mm plastic mixing paddle

Key Features and Benefits

• Carbon Steel Construction: The two metal paddles are made from carbon steel, which handles the resistance of heavy or thick paint materials.
• Zinc and Powder Coat Finish: This protective coating on the metal paddles guards against rust during regular use and cleaning.
• 8mm Hexagonal Shaft: The hex profile on the two metal paddles reduces the risk of slipping inside the drill chuck during mixing.
• Three Head Sizes Included: Two metal circular head sizes and one plastic paddle let you match the attachment to the paint type and container size.
• Plastic Paddle Included: The 60mm plastic mixing paddle handles thinner, lower viscosity paints and is easier to clean after use than metal alternatives.
• Fits Most Electric Drills: All three paddles attach to most standard electric drills, so no specialist power tool is required.

Specs & Attributes

• Material (Metal Paddles): Carbon steel
• Finish (Metal Paddles): Zinc and powder-coated
• Metal Paddle Lengths: 2 x 395mm
• Metal Paddle Head Diameters: 84mm and 58mm
• Metal Paddle Shaft Type: 8mm hexagonal
• Plastic Paddle Length: 355mm
• Plastic Paddle Head Diameter: 60mm
• Plastic Paddle Shaft Type: 6mm round
• Weight: 0.53kg

Typical Applications

• Mixing emulsion paint before application
• Stirring settled or separated paint back to an even consistency
• Blending high-viscosity masonry paint
• Preparing gloss or satinwood paint for use
• Mixing undercoat to a smooth, lump-free consistency
• Stirring specialised or textured decorating paints

How to Use

• Attach: Insert the mixer shaft into your drill chuck and tighten it firmly to prevent slipping.

• Prepare: Pour the paint into a container large enough for the mixing head to move freely.

• Submerge: Lower the mixing head fully into the paint before starting the drill.

• Start Slowly: Switch the drill on at its lowest speed setting to prevent splashing.

• Mix: Move the paddle up and down through the paint until you reach a smooth, even consistency.

• Clean: Rinse the paddle in clean water immediately after use. For oil-based paints, wipe with a suitable solvent first, then rinse.

Frequently Asked Questions (FAQs)

• What drill speed should I use with a paint mixer paddle?
  Start on the lowest speed setting to prevent splashing. Gradually increase as the paint begins to blend, keeping the mixing head fully submerged throughout.

• Can I use a cordless drill with a paint mixer paddle?
  Yes, a cordless drill works well for occasional, small-batch mixing. For regular or high-volume mixing tasks, a corded drill with a more powerful motor delivers more consistent results.

• What is the difference between a circular paddle mixer and a spiral mixer?
  Circular or flat paddles push paint in all directions, which suits thicker and multi-viscosity materials. Spiral heads pull paint downward for a smoother, air-free blend, which works better for thinner liquids.

• How do I clean a paint mixing paddle after use?
  Rinse the paddle in clean water while briefly running the drill to clear wet paint. For oil-based paints, wipe with a solvent-soaked cloth first, then rinse with warm soapy water.

• How long does it take to mix paint with a drill paddle?
  Paint typically needs 2-3 minutes of mixing to reach an even consistency. Paint that has settled over a long period may require slightly more time.

Summary

The Blue Spot Tools 3 Piece Paint Paddle Mixer Set contains three drill-driven attachments for high and low-viscosity paints. Two carbon steel paddles with circular mixing heads cover heavier materials, while the 60mm plastic paddle handles thinner coatings. All three fit most standard electric drills and carry Blue Spot Tools' Lifetime Guarantee.