Blue Spot Tools 20oz (560g) Tubular Steel Shaft Claw Hammer - Contoured Grip 26120

Blue Spot Tools 20oz (560g) Steel Shaft Claw Hammer

MPN: 26120

Barcode: 5028734261202

Size: 20oz (560g)

Overview:

The Blue Spot Tools 20oz claw hammer has a tubular steel shaft and a contoured grip. At 560g, it sits at the heavier end of general-purpose claw hammers. It suits framing, joinery, and general building tasks well. The curved claw handles nail removal across a range of timber applications. Blue Spot Tools backs it with their lifetime guarantee.

Key Features and Benefits

• Tubular Steel Shaft: The hollow shaft absorbs impact vibration, reducing strain on the hand during extended use.

• Contoured Grip: The shaped handle follows the natural curve of the hand for a more controlled swing.

• Bevelled Striking Face: The angled edge around the face reduces the risk of chipping on contact with hard materials.

Specs & Attributes

• Size: 20oz (560g)
• Guarantee: Blue Spot Tools Life Time Guarantee

Typical Applications

• Driving nails into timber during framing and joinery
• General carpentry and woodworking
• Extracting nails with the curved claw
• Fencing and decking installation
• Hanging fixtures and fittings
• Light demolition work

How to Use

• Grip: Hold the handle near the base to maximise striking force and control.

• Starting a Nail: Tap the nail lightly a few times to seat it upright before driving it fully.

• Striking: Keep your eye on the nail head and swing from the elbow in a smooth arc.

• Driving: Use firm, steady strokes to drive the nail flush with the surface.

• Removing a Nail: Hook the claw under the nail head and lever upward. Place a scrap block under the hammer head to protect the surface and extend leverage.

Frequently Asked Questions (FAQs)

• What is the difference between a curved claw and a straight claw hammer?
  A curved claw provides leverage for removing nails with minimal surface damage. It suits general carpentry and finishing work. A straight (rip) claw sits flatter and suits prying boards apart or demolition. It does not extract nails as cleanly as a curved claw.

• What weight claw hammer should I choose?
  A 16oz hammer suits lighter tasks and occasional use. A 20oz hammer delivers more force per swing. This makes it a better fit for general construction, framing, and driving larger nails into timber.

• Does a steel shaft hammer cause more vibration than a wooden handle?
  Yes. Steel transmits more vibration to the hand than wood or fibreglass. However, a tubular steel shaft absorbs more impact than a solid one. The hollow construction reduces some of the vibration transferred during striking.

• Can you use a claw hammer on masonry?
  No. Claw hammers use softer steel alloys and do not suit striking masonry, stone, or concrete. Using one on hard materials risks damaging the face or handle. A club hammer or mason's hammer is the correct tool for those tasks.

• What is the difference between a smooth face and a milled face hammer?
  A smooth face suits finish carpentry and trim work, leaving no mark on the surface. A milled (waffle or crosshatched) face grips nail heads during driving, reducing glancing blows. Tradespeople favour it for framing work where speed matters more than surface finish.

Summary

The Blue Spot Tools 20oz (560g) claw hammer is a mid-weight hand tool for trade and home use. The tubular steel shaft, contoured grip, and bevelled striking face cover the requirements for general nailing tasks. The hammer is covered by the Blue Spot Tools lifetime guarantee.