Tolsen Hi Vis Easy Read Tri Mitre Square 300mm 35081

Tolsen Hi Vis Easy Read Tri Mitre Square 300mm

MPN: 35081

Barcode: 6933528735342

Size: 300mm / 12"

Overview:

The Tolsen Hi Vis Easy Read Tri Mitre Square gives you fast, accurate right-angle checks and straight-line marking at 300mm (12"). The hi-vis markings are easy to read at a glance, whether you are working in a bright workshop or a faintly lit site.

The aluminium handle keeps the tool light in the hand without reducing control. A powder-coated finish protects the blade from minor knocks and everyday wear, keeping the square accurate over time.

At 300mm, the blade reaches across wider boards and larger assemblies with room to spare. It works well for timber marking, furniture building, framing, and general workshop tasks.

Key Features and Benefits

• 300mm (12") Blade: Provides extended reach for marking across wider boards and larger assemblies.
• Hi-Vis Easy Read Markings: Bold, high-visibility graduations allow fast, clear readings in any working environment.
• Aluminium Handle: Lightweight construction reduces hand exhaustion during extended marking sessions.
• Powder-Coated Finish: A protective coating resists minor abrasions and helps prevent rust from forming on the blade.
• 90-Degree Accuracy: Designed to deliver consistent right-angle checks for cuts, joints, and assemblies.
• Tri Mitre Design: Combines square and mitre functions in a single compact tool.
• Lightweight Build: Easy to carry between tasks without adding bulk to your toolkit.
• Suitable for Timber and Sheet Materials: Works across a range of common workshop and site materials.
• Practical 12" Size: Large enough for bigger projects, small enough to store and carry without effort.
• Easy to Clean: The smooth powder-coated surface wipes down quickly after use.

Typical Applications

• Marking cut lines across timber and sheet materials
• Checking right angles during furniture assembly
• Stud and timber framing layout
• Cabinet making and joinery
• Drywall and plasterboard marking
• General workshop marking and measuring
• Home improvement and repair tasks

How to Use

• Position the Handle: Place the thick aluminium handle flat and flush against a straight edge of your material.

• Align the Blade: Slide the square along the edge until the blade sits exactly at your intended mark.

• Draw Your Line: Hold the handle firmly with one hand and draw along the blade edge with a pencil or marking knife.

• Check a Corner Joint: Place both arms of the square flush against the surfaces of a joined corner to verify squareness.

• Identify Gaps: Look for any light showing between the blade and the material. No gap means the angle is at 90 degrees.

• Alter if Required: If a gap appears, loosen fasteners or re-clamp the joint and recheck until the square sits flush.

Frequently Asked Questions (FAQs)

• What is a tri mitre square used for?
  A tri mitre square is a hand tool used for marking straight lines and checking 90-degree angles on timber and other materials. It is common in woodworking, framing, cabinet making, and general construction work.

• Is 300mm large enough for woodworking projects?
  Yes. A 300mm blade gives you enough reach to mark across most standard timber widths and to check squareness on larger assemblies such as cabinets and frames. It is one of the most widely used sizes for workshop and site work.

• How do I keep the square accurate over time?
  Store the square in a dry location away from heavy tools that could knock or bend the blade. Wipe it down after use to remove sawdust and moisture. Avoid dropping it, as impact can throw the blade out of square.

• Can I clean the square if it gets paint or adhesive on it?
  Yes. Use a damp cloth to wipe the surface after use. For stubborn marks, a mild household cleaner works well on the powder-coated finish. Dry the square thoroughly before storing it.

• What is the advantage of an aluminium handle over a plastic one?
  Aluminium handles tend to be more resistant to cracking or warping from knocks and temperature changes. They also feel more solid in the hand, which helps when applying firm pressure during marking.

Summary

The Tolsen Hi Vis Easy Read Tri Mitre Square (300mm) is a straightforward marking and checking tool built around an aluminium handle and a powder-coated blade. Its hi-vis graduations keep readings fast and clear, while the 300mm blade handles a wide range of marking tasks from timber cutting to furniture assembly.