Blue Spot Tools Ironmongery 76mm Zinc Plated Tower Bolt 78005

Blue Spot Tools Ironmongery 76mm Zinc Plated Tower Bolt

MPN: 78005

Barcode: 5028734780055

Weight: 0.13kg

Overview:

This 76mm tower bolt from Blue Spot Tools is made from carbon steel with a zinc plated finish to resist corrosion outdoors. It suits permanent installations on wooden gates, fences, and shed doors, and comes with all fittings needed for installation.

The zinc plating protects the carbon steel body against moisture and rust. This bolt is built for outdoor use and arrives ready to fit, with no additional hardware required.

Key Features and Benefits

• Carbon Steel Body: Provides a strong, hard-wearing base for an outdoor bolt.
• Zinc Plated Finish: Protects against rust and corrosion when exposed to the elements.
• 76mm Bolt Length: Sized for standard gate, fence, and shed door applications.
• Fittings Included: All necessary fixing hardware comes in the pack - no additional purchases needed.
• 5 Year Guarantee: Backed by a manufacturer guarantee for added peace of mind.

Specs & Attributes

• Bolt Length: 76mm
• Material: Carbon steel
• Finish: Zinc plated
• Weight: 0.13kg

Typical Applications

• Securing wooden garden gates
• Fastening fence panels or fence doors
• Locking shed doors
• Securing outbuilding doors and side gates
• Fitting to summerhouse or playhouse doors
• General outdoor ironmongery installations on timber

How to Use

• Mark the Position: Hold the bolt against the door or gate and mark the screw hole positions with a pencil.

• Pre-Drill: Use a drill bit slightly smaller than the supplied screws to create pilot holes. This prevents the wood from splitting.

• Fit the Bolt Body: Align the bolt with your pilot holes and screw the body firmly into place.

• Fit the Keeper: Mark and drill pilot holes for the keeper (staple) on the door frame or post. Screw it into position.

• Test the Action: Slide the bolt back and forth to check it runs smoothly into the keeper. Adjust the keeper position if needed before fully tightening.

Frequently Asked Questions (FAQs)

• What is the difference between a tower bolt and a barrel bolt?
  The two terms are often used interchangeably, but barrel bolts typically have a rounded, cylindrical body. Tower bolts have a flat, rectangular body with a slide mechanism. Both operate in the same way and serve the same purpose.

• Can a tower bolt be fitted to a metal gate?
  Tower bolts are generally designed for timber. Fitting one to metal requires appropriate self-tapping screws or bolts through pre-drilled holes, which are not included in this pack.

• How do I stop a tower bolt from rusting outdoors?
  Choose a bolt with a corrosion-resistant finish, such as zinc plating or stainless steel. Avoid prolonged standing water around the bolt and check it periodically for signs of wear to the coating.

• Why does my tower bolt keep sticking?
  Sticking is usually caused by misalignment between the bolt and keeper. Loosen the keeper screws, reposition it so the bolt slides in without resistance, then retighten. Applying a dry lubricant to the bolt can also help.

• Should a tower bolt be fitted on the inside or outside of a gate?
  For security, fit the bolt on the inside face of the gate or door. This stops it being operated from the outside and keeps the fixing screws hidden from view.

Summary

The Blue Spot Tools 76mm zinc plated tower bolt is a carbon steel outdoor bolt for wooden gates, fences, and shed doors. It arrives with all the fittings needed and carries a 5 year manufacturer guarantee.