Sika Sikabond PVA + 2.5 Litre SIKAPVA2 PVA+ 446004

Sika Sikabond PVA + 2.5 Litre PVA+

Sika Code 446004

MPN SIKAPVA2

Barcode 5055492700575

Sika Sikabond PVA+ 2.5 litre 4460043 is an economical quick drying adhesive, sealer and bonding agent and cement admixture which has many applications, typical used as a general purpose adhesive for most common building surfaces a primer and sealer which has a wide range of uses.

Supplied in a handy 2.5 litre tub.

Sikabond PVA + PVA will bond most common building materials providing one surface is porous.

Suitable for use as a bonding agent and admixture for concrete and plasters.

Suitable for use a surface dust proofer or for use as a internal filler when mixed with shavings or plaster.

Suitable for use as a highly effective easy to use general purpose adhesive for wood, cork, paper, textiles and more.

PVA Plus As a bonding agent

• For cement screeds and render, plaster and concrete.
• It will bond cement screeds, rendering and plaster to most sound surfaces
• such as concrete, stone and brick and new concrete to old without the need for hacking the surface to form a key.

Application method

• Tools apply using a brush, roller or spreader, and always use clean water.

General bonding

• when used neat PVA will bond most common building materials providing one surface is porous.

Sealing and Priming

• Apply to the clean surface with 1 part pva to 3 to 6 parts water and allow this to dry.

Bonding absorbent surfaces concrete or plaster

• Step 1 - prime the clean surface with 1 part PVA+ to 3 to 6 parts water and allow this to dry.
• Step 2 - once primer is dry, apply bonding coat of 1part PVA and 0.5 to 2 parts water, while the bonding coat is still tacky apply plaster / screed.

Sealing non-absorbent surfaces paint or tiles

• Repeat step 1 above, then paint or tiles etc.
• May be applied as per manufacturers instructions.

Applying internal patching mortars and screeds

• Always apply cement renders, screeds or plaster whilst the bonding coat is still tacky, if dry re-apply.

For bonding new screeds to old

• Prime clean surface with 1 part PVA+ diluted with 5 parts water and allow to dry, follow step 1 and 2 under bonding absorbent surfaces above.
• Recommended for internal use only.

For external application use sikabond sbr+

Not for load bearing applications.

As a cement admixture add 10l to 15l of sikabond pva+ in place of equivalent amount of gauging water per 50kg cement.

SIKAPVA2 Official Information

Sika Sikabond PVA+ 2.5 Litre Safety Data Sheet

Sika Sikabond PVA+ 2.5 Litre Technical Data Sheet

Sikabond PVA Plus Manufacturer Product Page