Forgefix Hex Nut Sleeve Anchor M8 x 65mm Masonry Fixing 10 Pack 10SA865

Forgefix Hex Nut Sleeve Anchor Masonry Fixing - M8 x 65mm, Pack of 10 (10SA865)

MPN: 10SA865

Barcode: 5028485446354

Product Overview:

The sleeve wedge cones deliver maximum expansion, even in shallow anchoring depths. With a reduced outside sleeve diameter compared to thread size, these fixings create smaller hole sizes while minimising stress in base materials.

These anchors feature a zinc-yellow passivated finish for lasting corrosion resistance. You'll find fixture removal or repositioning straightforward, as the bolt stays securely in the sleeve during adjustments.

Key Features:

• Precision Design: The sleeve wedge cones ensure a reliable grip, even in shallow anchoring situations.
• Material Protection: A smaller outside sleeve diameter compared to thread size reduces strain on your base materials.
• Weather Resistant: Zinc yellow passivated finish guards against wear in all conditions.
• Smart Engineering: The bolt remains in the sleeve for quick fixture adjustments.
• Quick Installation: Simple through-fixing design lets you complete installations rapidly.
• User-Friendly: No special tools are needed beyond a standard drill and spanner.
• Multiple Uses: Suitable for balustrades, handrails, racking, machinery and more.

Also known as Projection Bolt sleeve anchors, these fixings suit numerous applications, from fixing balustrades and handrails to securing racking and holding down machinery.

Specifications:

• M8 Sleeve anchors should be used with an 8mm masonry bit
• Bolt head size: 10mm
• Maximum thickness of material to be anchored: 37mm
• Quantity: Bag of 10
• Head type: Hex
• Size: M8 x 65mm

All Sleeve Anchor Masonry Fixings

FAQs:

• What drill bit size should I use with these anchors?
  Use an 8mm masonry drill bit for proper installation of these M8 sleeve anchors.
• What materials can I fix these anchors into?
  These anchors work well in concrete, brick, blockwork and stone surfaces.
• What is the maximum thickness of material I can fix with these anchors?
  You can secure materials up to 37mm thick with these sleeve anchors.
• Why are these anchors yellow in colour?
  The yellow colour comes from the zinc passivation process, which creates lasting corrosion resistance.
• Can I remove and reposition fixtures after installation?
  Yes, the design lets you remove or reposition fixtures as the bolt stays within the sleeve.
• What tools do I need for installation?
  You'll need a hammer drill with an 8mm masonry bit and the right spanner or socket for the 10mm hex head.
• Can they be used for close to edge applications?
  No for close to edge use you must use a chemical anchor fixing as this method does not put pressure on the surrounding area it becomes one.

Pick up the Forgefix Hex Nut Sleeve Anchor Pack today for your next fixing project.