Forgefix Hex Nut Sleeve Anchor M8 x 40mm Masonry Fixing 10 Pack 10SA840

Forgefix Hex Nut Sleeve Anchor Masonry Fixing (10SA840) M8 x 40mm, Pack of 10

MPN: 10SA840

Barcode: 5028485709626

Product Overview:

You'll find these Forgefix sleeve anchors deliver reliable holding power in masonry materials. The sleeve wedge cone design creates maximum expansion, even at shallow depths, while the smaller sleeve diameter reduces stress on your base materials.

The yellow zinc passivated finish shields against corrosion, ensuring lasting durability in various conditions. The practical through-fixing design lets you remove or reposition fixtures with ease—the bolt remains in the sleeve throughout the process.

Key Features:

• Smart Design: The smaller outside sleeve diameter needs reduced hole sizes while maintaining strong anchoring
• Base Material Protection: The design reduces stress across concrete, brick, blockwork, and stone
• Weather Protection: Yellow zinc passivated coating guards against rust and wear
• Quick Adjustments: The through-fixing approach makes removal and repositioning simple
• Multiple Uses: Ideal for fixing balustrades, handrails, racking, machinery, and other installations

Technical Specifications:

• Size: M8 x 40mm
• Required Drill Bit: 8mm masonry bit
• Bolt Head Size: 10mm
• Maximum Material Thickness: 12mm
• Head Type: Hex
• Material: Yellow zinc passivated steel
• Quantity: 10 pieces per pack

Installation Steps:

• Use an 8mm masonry bit for your hole
• Drill to the needed depth
• Push the anchor through your fixing into the hole
• Secure by tightening the hex nut

All Sleeve Anchor Masonry Fixings

FAQs:

• Which materials work best with these anchors?
  You can use these anchors with concrete, brick, blockwork, and stone for secure fixing results.
• What tools will I need?
  You'll want an 8mm masonry drill bit and a spanner or socket matching the hex head size.
• How does the sleeve design help me?
  When you adjust or move fixtures, the bolt stays in the sleeve, making changes quick and straightforward.
• What makes these anchors yellow?
  The zinc passivation process creates a yellow finish, adding protection against corrosion.
• How thick can my fixed materials be?
  You can secure materials up to 12mm thick with these anchors.
• Can I use these anchors outside?
  The yellow zinc passivated finish protects against weather, making these suitable for indoor and outdoor use.
• Can they be used for close to edge applications?
  No for close to edge use you must use a chemical anchor fixing as this method does not put pressure on the surrounding area it becomes one.

Add these Forgefix sleeve anchors to your toolkit and tackle your masonry fixing tasks with confidence.