Forgefix Hex Nut Sleeve Anchor M12 x 75mm Masonry Fixing 5 Pack 5SA1275

Forgefix Hex Nut Sleeve Anchor Masonry Fixing M12 x 75mm Pack of 5 5SA1275

MPN: 5SA1275

Barcode: 5028485063582

Product Overview:

Get professional-grade masonry fixings with these M12 Forgefix sleeve anchors. Thanks to their innovative sleeve wedge cone design, you'll achieve maximum expansion even at shallow depths, while the reduced sleeve diameter minimises stress on your base materials.

Built for reliability, these zinc-yellow passivated anchors deliver outstanding corrosion resistance. Their smart design keeps the bolt within the sleeve, making fixture adjustments or removal straightforward when you need to make changes.

Technical Specifications:

• Dimensions: M12 x 75mm
• Required Drill Bit: 12mm masonry bit
• Bolt Head Size: 14mm
• Maximum Material Thickness: 27mm
• Minimum Hole Depth: 55mm
• Quantity: 5 pieces per pack
• Head Type: Hex
• Finish: Zinc yellow passivated coating

Applications and Benefits:

These sleeve anchors, also known as projection bolt anchors, excel in various installation scenarios:

• Structural Applications: Perfect for securing balustrades, handrails, and heavy-duty racking
• Industrial Uses: Ideal for machinery fixing and equipment mounting
• Construction Projects: Reliable for both permanent and adjustable installations
• Material Compatibility: Works effectively with concrete, brick, blockwork, and stone

Installation Features:

• Reduced Diameter Design: The sleeve's smaller outer diameter compared to thread size means you'll need smaller holes, reducing material stress
• Expandable Mechanism: The wedge cones create an optimal expansion, even in shallow depths
• Bolt Retention: The bolt stays within the sleeve during adjustment, simplifying repositioning
• Quick Installation: Straightforward fitting process saves you time on the job

All Sleeve Anchor Masonry Fixings

Frequently Asked Questions:

• What drill bit size should I use for installation?
  Use a 12mm masonry drill bit to create the perfect-sized hole for these M12 anchors.
• What materials can I fix these anchors into?
  You can use these anchors with concrete, brick, blockwork, and stone. They're designed to minimise stress on these base materials.
• Why is the zinc-yellow passivated coating important?
  This special coating provides superior corrosion resistance, protecting your fixings from environmental damage and extending their service life.
• What's the maximum thickness of material I can fix with these anchors?
  You can secure materials up to 27mm thick with these 75mm anchors.
• Can I remove or adjust the fixings after installation?
  Yes, the design keeps the bolt within the sleeve, making it easier to adjust or remove fixtures when needed.
• What's the minimum depth needed for proper installation?
  You'll need a minimum hole depth of 55mm to ensure proper anchor engagement and maximum holding strength.
• Can they be used for close to edge applications?
  No for close to edge use you must use a chemical anchor fixing as this method does not put pressure on the surrounding area it becomes one.

Ready to secure your next project? Choose these Forgefix sleeve anchors for reliable, adjustable fixings that stand the test of time.