Forgefix Hex Nut Sleeve Anchor M12 x 129mm Masonry Fixing 5 Pack 5SA12129

Forgefix Hex Nut Sleeve Anchor Masonry Fixing M12 x 129mm Pack of 5 (5SA12129)

MPN: 5SA12129

Barcode: 5028485064497

Product Overview:

These Forgefix sleeve anchors offer through fixing capabilities for swift installation. The sleeve wedge cones provide maximum expansion at shallow anchoring depths, whilst the reduced outside sleeve diameter compared to thread size allows for smaller hole sizes.

The design significantly reduces stress in base masonry materials, including concrete, brick, blockwork and stone. With a zinc-yellow passivated finish, these anchors resist corrosion effectively whilst allowing straightforward fixture removal or repositioning as the bolt remains in the shield.

What's Included:

• M12 x 129mm sleeve anchors
• Pack quantity: 5 pieces
• Hex head design
• Through fixing system
• Zinc yellow passivated finish

Technical Details:

• Required masonry bit size: 12mm
• Bolt head size: 14mm
• Maximum material thickness for anchoring: 81mm
• Minimum hole depth requirement: 55mm
• Thread size: M12
• Overall length: 129mm

Applications:

These sleeve anchors, also known as projection bolt sleeve anchors, serve multiple fixing needs:

• Balustrade securing
• Handrail mounting
• Racking installation
• Machinery holding
• Structural fixings

The zinc yellow passivation process creates a protective coating through electroplating, similar to galvanised and zinc-plated processes, with added yellow dye for identification. This treatment protects against corrosion whilst maintaining the anchor's functionality.

All Sleeve Anchor Masonry Fixings

Frequently Asked Questions:

• What size drill bit should I use with these anchors?
  Use a 12mm masonry bit for proper installation of these M12 sleeve anchors.
• What materials can I use these anchors with?
  These anchors work effectively in concrete, brick, blockwork and stone masonry materials.
• What is the maximum thickness of material I can fix through?
  You can fix through materials up to 81mm thick with these anchors.
• Why do these anchors have a yellow finish?
  The yellow passivated zinc coating provides corrosion resistance through an electroplating process.
• What makes these anchors practical for installation?
  The through-fixing design allows quick installation and keeps the bolt within the sleeve for easier adjustment.
• What tools do I need for installation?
  You need a suitable spanner or socket drive matching the 14mm hex head for accurate fitting.
• Can they be used for close to edge applications?
  No for close to edge use you must use a chemical anchor fixing as this method does not put pressure on the surrounding area it becomes one.

Add these reliable Forgefix sleeve anchors to your fixing supplies today and ensure secure installations for your masonry projects.