Forgefix Hex Nut Sleeve Anchor M10 50mm Masonry Fixing 10 Pack 10SA1050

Forgefix Hex Nut Sleeve Anchor Masonry Fixing M10 50mm Pack of 10 10SA1050

MPN: 10SA1050

Barcode: 5028485717027

Product Overview:

The Forgefix Sleeve Anchor M10 50mm is a reliable masonry fixing designed for maximum expansion, even in shallow anchoring depths. The sleeve wedge cones offer superior grip and efficiency, ensuring secure fixtures across various materials. The reduced outside sleeve diameter compared to the thread size allows for smaller hole sizes, making it ideal for applications where precision is crucial.

Manufactured with zinc Yellow passivation, these anchors provide enhanced corrosion resistance, making them suitable for both indoor and outdoor use. The anchors are designed for easy removal and repositioning, as the bolt remains in the sleeve during the process.

These sleeve anchors are also known as Projection Bolt sleeve anchors, and they are commonly used in a variety of installation tasks.

Specifications:

• M10 Sleeve anchors require a 10mm masonry drill bit.
• Bolt head size: 13mm.
• Maximum material thickness to be anchored: 12mm.
• Minimum hole depth: 45mm.
• Easy to use: with quick installation.
• Quantity: 10 anchors per pack.
• Head type: Hex.
• Size: M10 x 50mm.

Applications:

These sleeve anchors are widely used for fixing balustrades, handrails, racking, and holding down machinery, making them a suitable choice for many construction and DIY projects. Ensure the correct socket drive or spanner is used for proper installation

All Sleeve Anchor Masonry Fixings

FAQ's:

• What size masonry drill bit is needed for the M10 sleeve anchor?
  The M10 sleeve anchors require a 10mm masonry drill bit for installation.
• Can the bolt be removed and repositioned?
  Yes, the bolt can be easily removed or repositioned, as it remains in the sleeve during the process.
• What is the corrosion resistance of the sleeve anchors?
  The anchors are Zinc Yellow Passivated, providing excellent corrosion resistance, ideal for various environments.
• What is the maximum material thickness these anchors can be used with?
  The maximum thickness of material that can be anchored with these sleeve anchors is 12mm.
• How deep should the hole be when installing these anchors?
  The minimum hole depth required for installation is 45mm.
• How many anchors are included in the pack?
  The pack contains 10 sleeve anchors, each sized M10 x 50mm.
• Can they be used for close to edge applications?
  No for close to edge use you must use a chemical anchor fixing as this method does not put pressure on the surrounding area it becomes one.

For fast and secure installation, trust the Forgefix Hex Nut Sleeve Anchor M10 50mm. Perfect for all your masonry fixing needs.