Toupret Plasterboard Joint Skim & Fill Quick Dry 5kg FGBJSR05GB

Toupret Plasterboard Joint Skim & Fill Quick Dry 5kg - FGBJSR05GB

MPN: FGBJSR05GB

Barcode: 3178310017890

Weight: 5kg

Colour: White (when dry)

Overview:

Toupret Plasterboard Joint, Skim & Fill Quick Dry is a powder filler for interior plasterboard jointing, skimming, and surface filling. Applied in a single coat, it dries fast - the surface is ready to overpaint in just 3 hours. There is no depth limit and no shrinkage once dry.

This filler bonds well to a wide range of interior surfaces, including plasterboard, cement, concrete, and old painted walls. No spot priming is needed before painting or applying wall coatings. It conforms to BS EN 13963 for plasterboard jointing applications.

The powder mixes with water before use - 380ml per 1kg for filling and 450ml per 1kg for skimming. Coverage is approximately 1.1kg per m² at 1mm thickness. Working time from mixing to application is 40 minutes.

Key Features and Benefits

• Fast Drying: Ready to overpaint in just 3 hours after application
• Single Coat: Covers most filling and skimming jobs in one pass
• No Depth Limit: No shrinkage once dry and no maximum application thickness
• No Spot Priming: Paint directly over the dried surface without priming first
• IAQ A+ Rated: Very low VOC content of less than 0.01%
• BS EN 13963: Conforms to the standard for plasterboard jointing applications
• Working Time: 40-minute window from mixing to application
• Easy to Sand: Sands back smoothly once fully dry
• Strong Adhesion: Exceeds 0.5MPa bond strength to substrate
• Compatible Surfaces: Bonds to plasterboard, cement, concrete, gypsum, and primed wood
• Application Conditions: Apply at temperatures between +8°C and +35°C, at relative humidity below 70%
• Guarantee: Backed by a 12-month guarantee from the date of purchase, provided the product remains in its original sealed packaging and is kept in a dry storage environment

Typical Applications

• Jointing plasterboard panels for a flush, seamless finish
• Skimming interior walls before painting or wall covering
• Filling holes and voids in plasterboard
• Levelling uneven areas on interior wall surfaces
• Finishing new plasterboard installations
• Patching and repairing old painted surfaces
• Surface preparation prior to painting or applying wall coatings

How to Use

• Surface Preparation: Substrates must be hard, clean, cohesive, sound, and dry before starting. Do not apply to exterior surfaces.

• Mixing for Filling: Add 380ml of water per 1kg of powder (38%). Pour powder into the water and stir until smooth with no lumps.

• Mixing for Skimming: Add 450ml of water per 1kg of powder (45%). Stir thoroughly until you reach a smooth, lump-free consistency.

• Application: Apply with a coating blade, trowel, or putty knife. One coat covers standard applications with no fill depth restriction.

• Drying and Overcoating: Allow the surface to dry fully. Painting can begin approximately 3 hours after application, depending on coat thickness, substrate, and ambient conditions.

• Sanding: Sand back once fully dry to achieve the desired finish. Always wear a dust mask (P2 filter minimum) when sanding.

Frequently Asked Questions (FAQs)

• How long does Toupret Joint, Skim & Fill Quick Dry take to dry?
  The surface is ready to paint approximately 3 hours after application. Drying times vary depending on coat thickness, ambient temperature, and substrate type.

• Can this filler be used on exterior surfaces?
  No. This product is for interior use only. Do not apply it to external walls or any outdoor surface.

• What is the coverage rate?
  At 1mm thickness, approximately 1.1kg covers 1m². There is no maximum application depth, so coverage will vary based on how thickly the product is applied.

• Do I need to prime the surface before painting?
  No spot priming is required. Once fully dry, the surface can be overcoated directly with paint or wall coatings. Avoid polyurethane and epoxy solvent-based paints.

• What water-to-powder ratio should I use when mixing?
  For filling, add 380ml of water per 1kg of powder. For skimming, increase this to 450ml per 1kg. Always add powder to water and stir until smooth.

Summary

Toupret Joint, Skim & Fill Quick Dry is a fast-setting interior powder for plasterboard jointing, skimming, and filling. It applies in a single coat, dries in 3 hours, and needs no spot priming before painting. Rated A+ for indoor air quality and conforming to BS EN 13963, this 5kg bag (FGBJSR05GB) suits professional use on new and existing plasterboard.

"Always read the Toupret Plasterboard Joint, Skim & Fill Quick Dry Powder Technical Datasheet before first use to confirm you have the correct product and information for your application."