Timco 350 Tub C2 Strong-Fix 5.0 x 70mm Multi-Use Pozi Screws 50070C2TUB

Timco C2 Strong Fix Premium Multi Use Pozi Screw 5.0 x 70mm 50070C2TUB

375 Piece Twin Cut Tub

MPN: 50070C2TUB

Barcode: 5055331896407

Overview:

The Timco 375 Tub C2 Strong-Fix 5.0 x 70mm Multi-Use Pozi Screws are premium twin-cut wood screws designed for rapid installation and exceptional holding power in a wide range of materials. Manufactured from hardened steel with a double countersunk head and ribs, they deliver superior drive control and reduced risk of timber splitting. A Gleitmo high-performance lubricant coating reduces insertion torque by up to 52% and provides significantly enhanced corrosion resistance compared to standard zinc plating. Supplied in a handy bulk tub with a 38mm Pozi PZ2 impact driver bit, these screws are ideal for professional joinery, carpentry and general construction work.

Key Features

• 5.0 x 70mm C2 Strong-Fix twin-cut premium multi-use Pozi screws

• Hardened steel construction for strength and long-lasting performance

• Double countersunk head with ribs for clean, flush finishing and reduced splitting

• Gleitmo lubricant coating for lower insertion torque and easier driving

• Enhanced corrosion resistance versus standard zinc-plated screws

• Deep Pozi PZ2 recess for positive drive and reduced “cam-out”

• Rapid pick-up twin-cut point for faster starting in timber and board materials

• Supplied in a 375 piece bulk tub with 38mm PZ2 impact driver bit included

Specifications

• Brand: Timco

• Range: C2 Strong-Fix

• Product Type: Premium multi-use twin-cut wood screws

• Size: 5.0 x 70mm

• Head Type: Double countersunk with ribs

• Drive Type: Pozi PZ2

• Material: Hardened steel

• Coating: Gleitmo lubricant with enhanced corrosion resistance

• Point Type: Twin-cut rapid start point

• Pack Size: 375 piece bulk tub

• Included Accessory: 38mm Pozi PZ2 impact driver bit

• MPN: 50070C2TUB

• Barcode: 5055331896407

• Typical Use: Professional joinery, carpentry and timber construction

Applications

• General joinery and carpentry projects

• Timber frame and structural timber construction

• Furniture manufacturing and assembly

• Fixing into softwood and hardwood framing

• Securing chipboard, MDF and other engineered wood products

• Light-duty fixing into thin sheet metal and plastic where appropriate

How to Use

• Select the appropriate pilot hole where necessary, especially in hardwood or near edges, to minimise the risk of splitting.

• Position the screw and drive using a Pozi PZ2 bit, keeping the driver in line with the screw for maximum control and reduced cam-out.

• Drive the screw until the double countersunk head sits flush with or just below the surface for a neat finish.

• Avoid over-driving, particularly in softer materials, to maintain optimum holding strength and prevent head damage.

• Use the included 38mm PZ2 impact bit for best performance with impact drivers and consistent engagement in the screw recess.

• Always follow good site practice and select the correct screw length and size for the materials being fixed.

Timco 375 Tub C2 Strong-Fix 5.0 x 70mm Multi-Use Pozi Screws 50070C2TUB – Key FAQs

• What materials can these Timco C2 Strong-Fix screws be used in?

  • These 5.0 x 70mm screws are suitable for hardwood, softwood, chipboard, MDF, selected plastics and thin sheet metal, making them ideal for general joinery, carpentry and construction work.

• What does the twin-cut point on these screws do?

  • The twin-cut point provides rapid pick-up and reduced insertion resistance, helping the screw start quickly, improving pull-out performance and reducing the risk of timber splitting during installation.

• Why is the Gleitmo coating on these screws beneficial?

  • Gleitmo is a high-performance lubricant that significantly reduces insertion torque and improves driveability while also enhancing corrosion resistance compared to standard zinc-plated screws.

• What is the advantage of the double countersunk head with ribs?

  • The double countersunk head with ribs helps the screw sit neatly flush with the surface, reduces splitting at the head area and improves clamping force for a stronger, more professional finish.

• Do I need a specific bit to drive these screws?

  • These screws use a Pozi PZ2 drive and are supplied with a 38mm PZ2 impact bit. Using the correct bit ensures positive engagement, reduced cam-out and more efficient installation.

• Are these Timco C2 Strong-Fix screws suitable for professional use?

  • Yes, they are designed as a high-performance professional fixing, offering hardened steel construction, advanced coating technology and reliable performance across a wide range of trade applications.

• Can these screws be used externally?

  • The enhanced corrosion resistance makes them suitable for many general external applications, but always check exposure conditions and consider additional protective measures where long-term weathering is severe.