Mexco M14 to Hex Adaptor Drill Hole saw's etc MEXTDXM14HEX

Mexco M14 to Hex Adaptor Drill Hole saw's etc MEXTDXM14HEX

Barcode: 5060093862232

MPN: TDXM14HEXSET

Model: MEXTDXM14HEX 

Overview:

The Mexco M14 to Hex Adaptor Drill & Hole Saw Set allows you to run M14-threaded diamond tools in any standard drill with a 3-jaw chuck. By converting an M14 female thread to a hex shank, it means you can use Mexco tile drills, diamond ceramic hole saws and router fingers with corded or cordless drills instead of being limited to an angle grinder. This gives you more control, easier handling and better access in tight spaces.

Manufactured from hardened steel for strength and long service life, this handy set is suitable for both trade and serious DIY users. Supplied with an M14 to hex adaptor, a masonry pilot drill bit and an Allen key, it provides a simple, cost-effective way to get more from your existing M14 diamond tools.

Key Features:

• Converts M14-threaded diamond tools for use in standard 3-jaw drill chucks

• Ideal for Mexco tile drills, diamond hole saws and router fingers, plus other M14 tools

• Hardened steel construction for durability and resistance to wear

• Hex shank fits most corded and cordless drills

• Includes masonry pilot drill bit to help guide diamond hole saws in many applications

• Allen key supplied for securing and removing the pilot drill/adaptor

• Perfect for tile, ceramic and porcelain drilling where drill control is preferred over an angle grinder

• Useful upgrade for plumbers, tilers, kitchen fitters and bathroom installers

Applications:

• Adapting M14 diamond tile drills and hole saws to fit standard drill chucks

• Using Mexco and other compatible M14 diamond tools in cordless and corded drills

• Drilling ceramic and porcelain tiles, and suitable masonry, depending on the bit used

• Creating neat openings for pipework, wastes, shower fittings and fixings

• On-site jobs where you want to avoid constantly swapping between a drill and an angle grinder

How to Use:

• Check that your M14 diamond tool (tile drill, hole saw or router finger) is compatible with an M14 adaptor.

• Thread the M14 tool onto the adaptor and tighten securely.

• Fit the masonry pilot drill bit into the adaptor where required and tighten using the supplied Allen key.

• Insert the hex shank into the drill’s 3-jaw chuck and tighten firmly.

• Set the drill to the correct speed and mode for the material – for diamond tile drilling this is usually rotary only, not hammer.

• Start drilling with light, even pressure, allowing the diamond tool to cut rather than forcing it.

• Withdraw the drill periodically to cool the bit and clear dust and debris, especially when working on hard tiles and porcelain.

• Always follow the operating and safety instructions supplied with your specific diamond tool.

Specifications:

• Brand: Mexco

• Product Code: MEXTDXM14HEX / TDXM14HEXSET

• Connection: M14 thread (tool side) to hex shank (drill side)

• Material: Hardened steel

• Compatibility: M14 tile drills, diamond hole saws, router fingers (Mexco and other M14-threaded brands)

• Included in Set:

  • 1 x M14 to Hex Adaptor

  • 1 x Masonry pilot drill bit

  • 1 x Allen key

FAQs:

• What tools can I use with this adaptor?
  This adaptor is designed for M14-threaded diamond tools such as tile drills, ceramic and porcelain hole saws, and router fingers from Mexco and other brands using the same M14 thread.

• Which drills will this fit?
  The adaptor has a hex shank that fits into most standard 3-jaw drill chucks, including corded and cordless drills.

• Can I use the hammer setting on my drill?
  For diamond tile and ceramic drilling you should normally use rotary only, with no hammer action. Always follow the recommendations provided by the diamond bit or hole saw manufacturer.

• Do I have to use the masonry pilot drill bit?
  Not in every situation. Some diamond tools are designed to run without a pilot, while others benefit from one for easier starting and accuracy. Use the pilot drill where it is recommended or where extra guidance is helpful.

• Is this adaptor suitable for trade use?
  Yes. The hardened steel construction and compatibility with a wide range of M14 diamond tools make it a reliable choice for professional plumbers, tilers and fitters, as well as experienced DIY users.