Silverline Magnetic Telescopic Screwdriver Screw and Bit Holder 704401

Silverline Finger Saver Telescopic Sleeve Magnetic Screwdriver Screw and Bit Holder

Barcode: 5060012961404

MPN: 704401

Overview:

The Silverline Finger Saver Sleeve Magnetic Screwdriver Screw and Bit Holder designed to guide Screws with a 9mm Internal bore of sleeve that simply pulls forward to guide and hold even the longest screws, safely and steadily as you drive them in. helping reduce slipped drivers and sore fingers. Its smooth rotating sleeve pulls forward to support the screw ideal for longer fixings then retracts as the screw seats, letting you drive the head flush or below the surface as needed. With a 1/4" hex drive and a magnetic 1/4" hex socket, it’s a practical addition to any drill/driver setup for faster, more controlled screwdriving.

Key Features

• Self-retracting guide sleeve supports the screw while starting

• Smooth rotating sleeve helps reduce snagging and wobble

• Helps reduce finger damage when holding screws in position

• Magnetic 1/4" hex socket for secure bit retention

• 1/4" hex drive suits most drill/drivers and screw guns

• Sleeve retracts to allow flush or countersunk finishes

• Suitable for driving longer screws with improved control

Specifications

• Brand: Silverline

• Product Type: Finger saver sleeve / magnetic bit holder

• MPN: 704401

• Drive Type: Hex

• Hex Size: 1/4"

• Internal Bore (Sleeve): 9mm

• Magnetic: Yes

• Overall Length: 80mm

Applications

• General screwdriving with a drill/driver or impact driver

• Starting and driving longer screws more safely

• Timber framing, studwork, battens and boards

• Sheet materials (ply, OSB, MDF) and general DIY jobs

• Situations where you need steadier screw alignment

How to Use

• Insert a 1/4" hex bit into the magnetic hex socket

• Pull the sleeve forward to expose the guide and support the screw

• Position the screw and start driving keep light forward pressure

• As the screw tightens, allow the sleeve to retract naturally

• Drive the screw head flush or below the surface as required

Silverline Finger Saver Telescopic Sleeve Magnetic Bit Holder – Key FAQs

• Can I use this with any drill/driver?
  Yes it's a standard 1/4" hex drive and suits most drill/drivers, screw guns and compatible impact drivers that accept 1/4" hex accessories.

• Does the sleeve stop me driving the screw head flush?
  No. The guide sleeve retracts as the screw goes in, allowing you to finish flush or slightly countersunk depending on your bit and surface.

• What size screws will it guide?
  The sleeve has a 9mm internal bore designed to guide and support many common screw sizes, including longer screws, during the start of driving.

• Is it magnetic enough to hold bits securely?
  The 1/4" hex socket is magnetic to help retain the bit and improve control, especially when starting screws in awkward positions.

• Is this a bit extender?
  It functions as a compact bit holder with a retracting guide sleeve. At 80mm long it offers a little extra reach, but its main purpose is screw guidance and safety.

• Will it work with impact drivers?
  It will fit impact drivers that accept 1/4" hex accessories, but for heavy, continuous impact use, check wear regularly and replace if the sleeve action becomes rough.