Blue Spot Tools 150mm Zinc Plated Carbon Steel Hot Bed Handle 78078

Blue Spot Tools 150mm Zinc Plated Carbon Steel Hot Bed Handle

MPN: 78078

Barcode: 5028734780789

Size: 150mm

Weight: 0.1kg

Overview:

The Blue Spot Tools 150mm Carbon Steel Hot Bed Handle is a traditional pull handle built for outdoor use. It fits wooden gates, fences, and shed doors as a permanent fixture. Carbon steel with a zinc-plated finish protects against corrosion in outdoor conditions.

At 150mm in length, this handle suits standard shed doors and garden gates. The arched bar profile forms a natural hand grip for pulling and closing exterior doors.

Key Features and Benefits

• Carbon Steel Build: The carbon steel construction provides the rigidity needed for outdoor pull applications.
• Zinc Plated Finish: Protects the steel against corrosion from outdoor exposure.
• Dual Fixing Holes at Each End: Two screw holes at each end secure the handle firmly to the mounting surface.
• Fittings Included: All necessary screws are supplied, so no additional hardware is required before fitting.
• 5-Year Guarantee: Blue Spot Tools provides a 5-year guarantee on this handle.

Specs & Attributes

• Size: 150mm
• Weight: 0.1kg
• Material: Carbon Steel
• Finish: Zinc Plated

Typical Applications

• Wooden garden gates
• Shed doors
• Fence doors and gate panels
• Garden outbuilding doors
• Wooden workshop doors
• Side gates

How to Use

• Mark the Position: Hold the handle against the door or gate surface and mark the desired placement.

• Mark the Fixing Holes: Hold the handle in position, then mark through each of the four screw holes onto the surface.

• Drill Pilot Holes: Drill a pilot hole at each marked point to prevent the wood from splitting.

• Align the Handle: Position the handle over the pilot holes, lining up each fixing hole in turn.

• Drive the Screws: Tighten each supplied screw until the handle sits flat and flush against the surface.

Frequently Asked Questions (FAQs)

• What is a hot bed handle?
  A hot bed handle is a traditional pull handle used on gates, shed doors, and other exterior wooden structures. It features an arched bar fixed at both ends, forming a hand grip for opening and closing doors.

• What is the difference between a zinc-plated and a galvanised finish?
  Zinc plating applies a thin zinc layer via an electrical process, producing a bright, shiny surface. Hot-dip galvanising immerses the steel in molten zinc, creating a thicker coating with greater resistance to corrosion. Galvanised products generally provide stronger protection in wet or harsh outdoor environments.

• Can hot bed handles be used on internal doors?
  Yes. Hot bed handles are designed for outdoor use on gates and sheds. They can also be fitted to internal doors, wooden cabinets, and cupboards.

• What sizes do hot bed handles come in?
  Hot bed handles are commonly available in 100mm and 150mm lengths. The 150mm size suits standard shed doors and garden gates. The 150mm size is better suited to larger or heavier doors.

• Are zinc-plated handles suitable for coastal or very wet environments?
  Zinc plating provides a level of corrosion protection but has a thinner coating than a hot-dip galvanised finish. In coastal areas or environments with constant moisture, a galvanised finish offers stronger, longer-lasting protection.

Summary

The Blue Spot Tools 150mm Carbon Steel Hot Bed Handle suits outdoor use on wooden gates, fences, and shed doors. A zinc-plated finish protects against corrosion, and all necessary screws are included. The handle carries a 5-year Blue Spot Tools guarantee.